JLab Audio Bluetooth Earbuds

Welcome

Thank you for purchasing JLab Audio. JLab Audio is proud to develop products that allow customers to enjoy the best audio.

Warranty & Support

All warranty claims are at the discretion of JLab Audio. Please retain your proof of purchase for warranty eligibility. For inquiries, please contact support@jlabaudio.com or visit intl.jlabaudio.com/contact.

Product Registration

Register now at intl.jlabaudio.com/register for the latest product information, usage guides, and FAQs.

Initial Setup: Bluetooth Pairing

1. On your device settings, turn on Bluetooth.

   [Diagram: Smartphone screen showing Bluetooth settings enabled.]

2. Press and hold the button for 10 seconds. Release the button when the light flashes red and blue, indicating pairing mode.

   [Diagram: Earbud with button highlighted, showing red and blue flashing light.]

3. In your device's Bluetooth settings, select 'JLab BT' to connect. Pairing is complete when the light flashes blue slowly.

   [Diagram: Smartphone screen showing Bluetooth settings with 'JLab BT' selected and light flashing blue slowly.]

Saving Settings

Once JLab BT is paired with a device, it will automatically connect to the Bluetooth device the next time you turn on the power. (Follow button function instructions).

Button Functions

• Volume Up: Press button once.
• Next Track: Press button for 2 seconds.
• Power On: Press button for 3 seconds.
• Power Off: Press button for 5 seconds.
• Play/Pause/Call Answer/End Call: Press button once.
• Activate SIRI (iOS) or OK GOOGLE (ANDROID): Press button twice.
• BLUETOOTH Pairing: Refer to "Initial Setup - Bluetooth Pairing".
• Volume Down: Press button once.
• Previous Track: Press button for 2 seconds.

Equalizer (EQ) Mode

Quickly press both buttons to switch between EQ settings. (3 EQ settings cycle).

• JLab SIGNATURE: Emphasizes vocals and bass for JLab C3™ signature sound.
• BALANCED: (2 beeps) Balanced sound with no special emphasis.
• BASS BOOST: (3 beeps) Emphasizes bass and sub-bass.

Sound Prompts

• Power On: Chime
• Bluetooth Connection: 2 beeps
• Low Battery: "Low Battery" (less than 20%)
• Power Off: Chime

Charging

1. Open the USB cover and connect the cable to a computer or USB power source for charging. Ensure the charging power source is rated at 5V or less.

   [Diagram: Earbud with USB cover open, connected to a laptop and a wall adapter via USB cable.]

2. The light will turn red while charging and change to blue when charging is complete.

   [Diagram: Earbud indicator light showing red for charging and blue for charged.]

Fitting

1. Insert the cushion fin first, then the gel ear tip. Note: Styles and options may vary.

   [Diagram: Earbud with cushion fin and gel ear tip shown separately and then assembled.]

2. Rotate the cushion fin to adjust for the best position. Try different ear tips and cushion fins for a better fit.

   [Diagram: Earbud with cushion fin being rotated.]

Cable Clip Usage

1. Attach the cable clip near the middle of the cable.

   [Diagram: Cable clip being attached to the earbud cable.]

2. Clip the cable to the front or back of your shirt.

   [Diagram: Earbuds worn around the neck, clipped to a shirt.]

Connection Troubleshooting

JLab BT not found on device

1. Turn Bluetooth off and then on again on your device settings.

   [Diagram: Smartphone screen showing Bluetooth being toggled off and on.]

2. If JLab BT still does not appear, repeat the Bluetooth pairing process from the initial setup.

   [Diagram: Smartphone screen showing Bluetooth settings.]

JLab BT does not reconnect to device when powered on

1. Delete the JLab BT entry from your device's settings.

   [Diagram: Smartphone screen showing how to forget/delete a Bluetooth device.]

2. Turn Bluetooth off and then on again on your device settings.

   [Diagram: Smartphone screen showing Bluetooth being toggled off and on.]

3. Repeat the Bluetooth pairing process from the initial setup.

   [Diagram: Smartphone screen showing Bluetooth settings.]

Connecting to a different device

JLab BT can connect to up to 8 devices. It will attempt to auto-connect to the last used device.

1. If multiple devices are connected to JLab BT, turn off Bluetooth on the unwanted devices and turn on Bluetooth for the desired device.

   [Diagram: Smartphone screen showing multiple Bluetooth devices, one being disconnected.]

2. Press and hold the button for 10 seconds. Release the button when the light flashes red and blue, indicating pairing mode. Select 'JLab BT' in your device's Bluetooth settings to connect. Pairing is complete when the light flashes blue slowly.

   [Diagram: Earbud showing red/blue flashing light, then smartphone screen showing connection.]

Warning

• Ensure the USB cover is closed and secured.
• Protects against sweat and water damage.
• Ensure the JLab BT earbuds are completely dry before charging.
• Exposure to moisture may damage internal components. Air drying is recommended before charging.

[Diagram: Earbuds showing water droplets and a warning symbol.]

Precautions

• Do not allow moisture or liquid to enter the earbud tips or charging port.
• Avoid extreme heat, cold, or humidity.
• Do not drop, crush, yank, strain the cable, or bend at sharp angles.
• Earwax buildup on ear tips can affect sound quality. Gently clean earwax with a cotton swab or other small tool to improve sound quality.
• If you experience discomfort or pain, lower the volume or discontinue use temporarily. If persistent discomfort occurs, discontinue use and consult a physician.
• Treat your earbuds like a nice pair of sunglasses; store them in a safe place when not in use.

Product Information

Product List | Product Alerts | Earbud Burn-in

JLab Audio + Burn-in Tool

Download on the App Store | Get it on Google Play

Visit: INTL.JLABAUDIO.COM