JLab Rewind Wireless Headphones

Thank you for purchasing JLab Audio. JLab Audio is proud to develop products that allow customers to enjoy the best audio.

Warranty & Support

Warranty: All warranty claims are subject to JLab Audio approval and our sole discretion. Please retain your proof of purchase to ensure warranty coverage.

Contact Us: For inquiries, please contact support@jlabaudio.com or visit intl.jlabaudio.com/contact.

Register Now: Visit intl.jlabaudio.com/register for product updates, user guides, and FAQs.

Initial Setup: BLUETOOTH Pairing

On your device settings, turn on Bluetooth.
Press and hold the button for 10 seconds until the light near the earcup flashes red and blue. This indicates pairing mode. Release the button.
On your device settings, select "JLab Rewind" to connect. The light will slowly flash blue, indicating Bluetooth pairing is complete.

Visual guide for pairing steps:

Step 1 shows a smartphone screen with Bluetooth turned ON in the settings menu.

Step 2 shows the headphones, highlighting the button near the earcup. The indicator light is shown flashing red and blue.

Step 3 shows the smartphone screen again, with "JLab Rewind" listed and connected under Bluetooth settings. The headphones are shown with a slowly flashing blue indicator light.

Setting Up / Adding a New BLUETOOTH Device

Turn off Bluetooth on previously paired devices.

Turn on Bluetooth on the new device, follow the initial setup process again, and select "JLab Rewind" to connect.

Notes

Bluetooth is a wireless communication technology. Therefore, obstructions between the device and headphones can cause unstable connections. The headphones are designed for use within 10 meters of the connected device in an environment free of obstructions.
Once paired, the headphones will automatically connect when powered on. Only one Bluetooth device can be connected at a time. To pair a different device, first unpair the current device in your Bluetooth settings.
If the Bluetooth connection is lost, manually reconnect the Bluetooth device.

Charging

Note: The headphones cannot be turned on while charging. Charging takes approximately 3 hours.

Connect the Rewind headphones to a computer or a USB 5V power source using the included charging cable.

A red light indicates charging, and a blue light indicates charging is complete.

Visual guide for charging status:

The headphones are shown connected to a power source (computer or USB) via a charging cable. A red indicator light signifies charging, and a blue indicator light signifies charging completion.

Button Functions

BLUETOOTH Pairing:

(Refer to initial setup instructions)

Power On: Press button for 2 seconds.
Power Off: Press button for 4 seconds. (Light flashes blue slowly when powered on)
Play/Pause/Answer Call/End Call: Single click ▶️
Activate Siri (iOS) or OK Google (Android): Double click ?️
Next Track: Press button for 2 seconds.

Equalizer Mode EQ Change:

Triple click to cycle through the 3 EQ settings.

JLab SIGNATURE™ (1 beep): JLab C3™ signature sound with enhanced vocals and bass.
BALANCED (2 beeps): Balanced sound.
BASS BOOST (3 beeps): Sound with enhanced bass and sub-bass.

Visual guide for equalizer modes:

Three distinct sound modes are presented. JLab SIGNATURE™ enhances vocals and bass, identified by a single beep. BALANCED mode offers a well-rounded sound, identified by two beeps. BASS BOOST mode emphasizes bass and sub-bass, identified by three beeps.

Precautions

Do not expose headphones to water or liquids.
Avoid extreme heat, cold, and humidity.
Do not drop, crush, pull forcefully, apply excessive force to the cable, or bend at sharp angles.
Earwax buildup can degrade sound quality. Carefully remove earwax using a cotton swab or other small tool to improve sound.
If you experience discomfort or pain, lower the volume or discontinue use temporarily.
If you experience persistent discomfort during use, discontinue use and consult a physician.
Treat your headphones with care, similar to sunglasses, and store them in a safe place when not in use.

App Integration

Product List | Product Alerts | Headphone Burn-in

JLab Audio + Burn-in Tool

[Download on the App Store]

[Get it on Google Play]

	JLab Audio Rewind Wireless Headphones: Setup, Features, and Care Guide Comprehensive guide to setting up, pairing, charging, and using your JLab Audio Rewind wireless headphones, including button functions, equalizer modes, and important care instructions.
	JLab Audio Rewind Wireless Earbuds: Quick Start Guide Your essential guide to JLab Audio Rewind wireless earbuds. Learn how to pair via Bluetooth, charge your device, use button controls, select EQ modes, and follow important care instructions for optimal performance.
	JLab Studio Wireless Headphones: Bluetooth Pairing, Features, and Charging Guide Your comprehensive guide to pairing your JLab Studio Wireless Headphones via Bluetooth, understanding button functions, EQ modes, charging instructions, and essential care tips for optimal audio performance.
	JLab Audio Bluetooth Earbuds User Manual and Guide Comprehensive guide to setting up, using, and troubleshooting your JLab Audio Bluetooth earbuds, covering pairing, button functions, EQ modes, and fitting.
	JLab Audio Rewind Trådløse Hovedtelefoner: Hurtig Start og Opsætning En guide til opsætning, parring, opladning og brug af JLab Audio Rewind trådløse hovedtelefoner, inklusive knapfunktioner og vigtige advarsler.
	JLab Rewind Wireless Headphones: User Manual & Setup Guide Get started with your JLab Rewind Wireless Headphones. This guide covers Bluetooth pairing, charging, button functions, equalizer modes, and important safety information.
	JLab Studio Wireless Headphones User Guide Comprehensive guide to setting up, using, and maintaining your JLab Studio Wireless Headphones, including Bluetooth pairing, button functions, EQ settings, charging, and important warnings.
	JLab Fit Sport 3 Wireless Earphones User Manual Comprehensive user manual for JLab Fit Sport 3 wireless Bluetooth earphones, covering setup, features, troubleshooting, and care.