Important Safety Information
⚠️ WARNING: Delicate table - Do not sit on the product.
⚠️ WARNING: Delicate table - Do not place heavy objects on this product. Maximum load 20 kg (44 lb).
Parts List
- 12x Dowel (part 101345)
- 4x Screw (parts 100211, 100212)
- 8x Screw (part 118331)
- 1x Allen key (part 100001)
- 6x Dowel (part 104171)
- 4x Cam lock (part 106720)
- 4x Cam lock (parts 119253, 118137)
- 4x Shelf support piece (parts 10051660, 10075382)
- 4x Base support (parts 112357, 10053816)
Assembly Steps
Step 1
Attach the four base supports (parts 112357, 10053816) to the bottom of the frame sections using screws.
Step 2
Insert eight screws (part 118331) into the designated holes of the frame sections.
Step 3
Attach the side support pieces to the frame. Insert four dowels (part 101345) for alignment and secure with screws.
Step 4
Insert four cam lock posts (part 106720) into the side supports. Insert four cam locks (parts 119253, 118137) into the frame and turn with a screwdriver ? to secure.
Step 5
Insert four dowels (part 101345) into the side panels.
Step 6
Insert two cam lock posts (part 106720) into the side panels. Insert two cam locks (parts 119253, 118137) into the frame and turn with a screwdriver ? to secure.
Step 7
Insert four screws (part 118331) into the top frame pieces.
Step 8
Attach the top frame pieces. Insert two cam lock posts (part 106720) and two cam locks (parts 119253, 118137) and turn with a screwdriver ? to secure.
Step 9
Turn the unit upside down. Insert six dowels (part 104171) into the top of the frame. Attach the legs by pushing them onto the dowels. Ensure correct orientation (marked with ❌ for incorrect placement).
Step 10
Turn the unit upright. Slide the shelves into the grooves on the inner side panels.
Step 11
Attach the four shelf support pieces (parts 10051660, 10075382) to the sides of the shelves using screws.
Step 12
Insert four cam lock posts (part 106720) into the shelves. Insert four cam locks (parts 119253, 118137) into the frame and turn with a screwdriver ? to secure the shelves.
Step 13
Insert four dowels (part 101345) into the top surface of the table.
Step 14
Place the tabletop onto the assembled base, aligning the holes with the dowels.
Step 15
Secure the tabletop from underneath using four screws (parts 100211, 100212) and the Allen key (part 100001).
