Mainstays Belden Park 7 Piece Patio Dining Set Chairs
Assembly and Care Guide
Model Numbers: MSS129900298055, MSS129900298057, MSS129900298058
Need Assistance? Contact our toll free Customer Service Hotline at: (877) 980-6928 - Monday through Friday 7:30am until 3:30pm PST-
Warranty
2 YEAR LIMITED WARRANTY
What is Covered
The frame is warranted to be free of manufacturing defects to the original purchaser for two years.
What is Not Covered
This warranty does not cover commercial use, hardware, acts of nature, fire, freezing, and abusive use. Purchased parts are not covered. Substitutions with similar merchandise may be made if the model in question is no longer in production.
Important Safety Instructions
Planning Assembly
Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
Note: More than one person may be required to assemble this product. ?
Attention
- Use the correct bolts as indicated. Do not tighten any bolts until the product is completely assembled.
- Do not discard any packaging until you have checked that you have all the parts and fittings required.
- Keep children away during assembly. This item contains small parts that can be swallowed by children. Children should always be under direct adult supervision while using this product.
- Retain these assembly instructions for future reference.
Parts Identification
Follow these steps for safe and proper assembly:
- Read instructions thoroughly and familiarize yourself with the inventory of parts and accompanying drawings.
- Lay out all parts on a flat surface and identify them using the table below.
Swivel Chair Components (x2)
| No. | Qty | Description |
|---|---|---|
| A | 1*2 | Seat: A chair seat with armrests. |
| B | 1*2 | Base: A chair base, likely a pedestal or support structure. |
| C | 1*2 | TR Rotating Components: The rotating mechanism that connects the seat to the base. |
| AA | 4*2 | Bolt M8X25: A bolt, specified as M8X25. |
| DD | 1 | Wrench: A tool for tightening bolts. |
Assembly Instructions
Single Chair Assembly
Note: Do not tighten bolts until all parts are connected.
Step 1
Attach TR rotating components (C) to the bottom of seat (A) using bolt (AA) and wrench (DD).
Diagram Description: Illustration showing bolt (AA) connecting rotating components (C) to the underside of the seat (A), with a wrench implied for tightening.
Step 2
Insert the assembled seat (A with C) to the base (B), rotate and fix.
Diagram Description: Illustration showing the assembled seat unit (A with C) being attached to the chair base (B), indicating rotation and fixing.
Maintenance
- We recommend the use of furniture covers when not in use.
- Inspect and tighten all bolts and fasteners on a regular basis to ensure the proper performance and safety of your product.
- To prolong the life and beauty of your furniture, we recommend that it be stored in a dry and protected area during off-season periods.
