MAINSTAYS 6-CUBE ORGANIZER

Product Specifications

• Top Panel Maximum Load: 22 LB (10 KG)
• Middle Shelf Maximum Load: 22 LB (10 KG)
• Bottom Panel Maximum Load: 33 LB (15 KG)

Important Information & Safety

Customer Assistance: Call 1-800-729-1569 for further assistance. Parts will be shipped free of charge for missing or damaged items. Do not return the product to the store as individual stores do not stock parts.

Assembly Manual: For prompt, reliable service, please have your assembly manual ready. This instruction booklet contains important safety information. Please read and keep for future reference.

• Do not allow children to climb or play on the unit.
• Clean the product with furniture polish and a soft cloth.
• Do not use harsh chemicals or abrasive cleaners.
• Move your new furniture carefully with two people. Never push or drag the unit.

Video Assembly Guide: A video assembly guide is available. Open your camera and point it at the QR code (if available) to access it.

Before Starting

• Read and understand all the steps carefully before starting. If each step is not followed in the correct order, the assembly will be difficult and may result in damages.
• Work in a spacious area, preferably on a carpeted surface, near where the unit will be used.
• Make sure all the parts are included. Most boards are labeled with a removable sticker.

Tools Needed to Assemble

• Hammer ?
• Phillips head screwdriver ?

Warning: Do not use power tools to assemble your furniture. Power tools may damage the parts and result in damage.

Parts List

• A: Top/Bottom panel (Qty: 2)
• B: Side panel (Qty: 2)
• C: Middle shelf (Qty: 2)
• D: Partition board (Qty: 3)
• E: Back panel (Qty: 3)

Hardware List

• 1: Screw (Qty: 16)
• 2: Plastic dowel 1 (Qty: 12)
• 3: Plastic dowel 2 (Qty: 4)
• 4: Nail (Qty: 24 + 1 Extra)
• 5: Safety mounting hardware (Qty: 1)
• 6: Cap (Qty: 16 + 1 Extra)

Assembly Steps

1. Step 1: Insert Hardware

   Insert hardware 2 (plastic dowel 1) and 3 (plastic dowel 2) into parts A, C, and D as shown.

   • Part A (Top/Bottom panel, Qty: 2) receives two dowels (2) each.
   • Part C (Middle shelf, Qty: 2) receives two dowels (2) each.
   • Part D (Partition board, Qty: 3) receives one dowel (2) and one dowel (3) each.

   Additional Notes: Dowel insertion depth is approximately 3/8" for dowel (2) and 1" for dowel (3).

2. Step 2: Attach Partition Boards

   Align and attach partition boards D to the shelves (A and C).

   Ensure dowels are inserted into both ends of partition board D and pay attention to the direction of dowels on the partition board during attachment.

3. Step 3: Attach Side Panels

   Attach part B (Side panel) to the structure using hardware 1 (screws) and 6 (caps) as shown.

   The side panels are secured to the edges of the top, middle, and bottom panels using screws, with caps covering the screw heads.

4. Step 4: Attach Back Panels

   Align and attach back panels E to the unit using nail 4 as shown.

   The back panels are secured to the rear edges of the assembled unit with nails.

5. Step 5: Secure to Wall

   WARNING: This product is not designed as a free-standing unit. For safety and stability, this product must be secured to a wall with the included mounting hardware (5).

   The diagram shows the assembled unit mounted to a wall using the safety mounting hardware, ensuring stability.

Completion

Now your unit is completed.

Assistance: Please call for replacement parts or assistance: 1-800-729-1569, Monday - Friday, 9:00 am - 5:00 pm EST.