Mainstays Ergonomic Office Arm Chair Assembly Instructions

Lot Number :

Date of purchase :

Manufactured by: Living Style (Singapore) Pte. Limited
3 Kallang Junction, #05-02, Singapore 339265

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Customer Service Support: 1-800-379-9773

Before you begin

FOR QUICK & EASY ASSEMBLY

FIND 3D INSTRUCTIONS FOR THIS PRODUCT IN

BILT
Intelligent Instructions

DOWNLOAD THE FREE APP

Download on the App StoreGET IT ON Google Play

Thank you for selecting one of True Innovations seating solutions.

It's True...Fast, Friendly Customer Service

At True Innovations, we are committed to excellence. Our primary objective is to provide fast, friendly customer service to all of our customers.

NOTES:

Call us first!!

DO NOT RETURN TO STORE

For immediate help with assembly or product information call our toll-free number:
1-800-379-9773
Mon-Fri 6:00 am to 5:00 pm Pacific Time

Customer Service Support: 1-800-379-9773

Included Parts

1 Casters (5)

2 Base (1)

3 Legs (2)

4 Gas Lift (1)

5 Seat Plate (1)

6A Left Arm (1)

6B Right Arm (1)

7 Seat Cushion (1)

8 Back Cushion (1)

Customer Service Support: 1-800-379-9773

Parts list

Hardware Kit Includes

A1 Small Bolts (15mm) (2)

A2 Big Bolts (20mm) (4)

A3 Small Bolts (3/4") (8)

B Allen Key (1)

Customer Service Support: 1-800-379-9773

Assembly Instructions

Step 1

Insert Legs (3) into the Base (2) and secure by 2 Bolts (A1). Tighten the bolts.

Warning: Fully hand-tighten 2 bolts at each leg/hub connection. Be careful not to overtighten or strip bolts. Do not use power tools. If you experience a problem with the leg attachment or are unable to fully tighten any of the bolts, stop. Do not use the base. Contact Customer Service for assistance. All bolts should be checked and re-tightened every 90 days.

Customer Service Support: 1-800-379-9773

Assembly Instructions

Step 2

Press the Casters (1) into holes at the end of each leg. Turn the Base (2) upright and insert Gas Lift (4) into the center hole of Base (2).

Customer Service Support: 1-800-379-9773

Assembly Instructions

Step 3

Align Seat Plate (5) over pre-drilled holes on the underside of the Seat Cushion (7) with front of seat plate facing the front of the seat cushion. Attach the Seat Plate (5) to Seat Cushion (7) using 4 Bolts (A2) as shown. Tighten all the bolts with the enclosed Allen Key (B).

Customer Service Support: 1-800-379-9773

Assembly Instructions

Step 4

Turn assembled seat upright and locate central hole of Seat Plate (5) over Gas Lift (4). Push down firmly until connection is secure.

Customer Service Support: 1-800-379-9773

Assembly Instructions

Step 5

Attach Armrests (6A & 6B) to the assembled Seat Cushion (7) using 4 Bolts (A3), securing the lower two holes on the bottom of Armrests (6A & 6B) to each side. Do not tighten bolts fully until the chair is completely assembled, with all arm bolts attached.

Customer Service Support: 1-800-379-9773

Assembly Instructions

Step 6

Attach the Back Cushion (8) to the Armrests (6A & 6B) by securing 2 Bolts (A3) to the lower holes of the Back Cushion (8) with Allen Key (B) as shown. Do not tighten bolts fully until the chair is completely assembled, with all arm bolts attached.

Customer Service Support: 1-800-379-9773

Assembly Instructions

Step 7

Gently pivot the Back Cushion (8) to an upright position. Secure the remaining Bolts (A3) to the Armrests (6A & 6B) and tighten all the bolts fully with Allen Key (B).

NOTE 1: Before using your new chair, ensure that all the bolts are tightened fully for safety reasons.

NOTE 2: Please keep the enclosed allen key and check all bolts periodically to ensure these remain tightly fastened.

Customer Service Support: 1-800-379-9773

Operating Instructions

Function Instruction

TO ADJUST SEAT HEIGHT

While seated, lean forward, lifting your body weight from the seat. Reach underneath the right side of chair and locate the flat-surfaced handle. Lift the handle up slowly to allow the chair to rise to the desired height. To lower seat height, lift the handle slowly while seated.

TO ADJUST ARMS

This chair has an adjustable arm function so the arms can be pushed up or pulled down. The arms can be pushed up next to the back cushion so the chair can easily roll under a desk.

Customer Service Support: 1-800-379-9773

Operating Instructions

Function Instruction

360° SWIVEL

360° seat swivel.

Customer Service Support: 1-800-379-9773

Operating Instructions

Care and Maintenance

Fabric Upholstery: Pay immediate attention to spills and vacuum regularly to maintain appearance. Cleaning products may cause discoloration and should be tested in an inconspicuous location prior to use on the chair.

This chair should not be used for other than its intended purpose. Please regularly inspect this chair for loose or missing screws, metal fatigue, cracks, broken welds, missing attachments and general instability. If this chair is damaged or appears to be unstable or unsafe, immediately remove from service and replace or repair the item. Failure to follow these warning could result in serious injury. This chair is not recommended for outdoor use.

Customer Service Support: 1-800-379-9773

Models: MS53100081252BK, MS26000052075GR, MS53100081252BK Ergonomic Office Arm Chair, MS53100081252BK, Ergonomic Office Arm Chair, Office Arm Chair, Arm Chair

File Info : application/pdf, 16 Pages, 1.64MB

PDF preview unavailable. Download the PDF instead.

original

References

Adobe PDF Library 17.0 Adobe InDesign 20.1 (Macintosh)

Related Documents

Preview Mainstays Belden Park 7 Piece Patio Dining Set Chairs Assembly and Care Guide
Comprehensive assembly and care guide for the Mainstays Belden Park 7 Piece Patio Dining Set Chairs, including warranty information, safety instructions, parts list, and assembly steps.
Preview Mainstays 6-Cube Organizer Assembly Instructions
Comprehensive guide for assembling the Mainstays 6-Cube Organizer, detailing parts, hardware, step-by-step instructions, and safety precautions.
Preview Mainstays Smart Box Spring Twin/Twin XL Assembly Guide and Warranty
Concise assembly instructions, parts list, and warranty details for the Mainstays Smart Box Spring in Twin and Twin XL sizes. Includes model numbers MS20D1102223, MS20D1102224, MS20D1102229, MS20D1102230.
Preview Mainstays 6-Cube Organizer Assembly Guide
Step-by-step assembly instructions, parts list, safety guidelines, and support information for the Mainstays 6-Cube Organizer by Huisen Furniture.
Preview Mainstays 0.7 cu.ft. Microwave Oven User Manual
This user manual provides important safety instructions, installation guidelines, operating procedures, and maintenance tips for the Mainstays 0.7 cu.ft. Microwave Oven. It covers features like the control panel, cooking techniques, and troubleshooting.
Preview Mainstays Floating Bluetooth Speaker Light Instruction Manual
Comprehensive instruction manual for the Mainstays Floating Bluetooth Speaker Light (Model MS13-702-002-27), detailing specifications, button functions, charging, safety warnings, and FCC compliance.
Preview MAINSTAYS LED Desk Lamp with Multi-Charger User Manual
Comprehensive guide for the MAINSTAYS LED Desk Lamp with Multi-Charger, covering features, installation, operation, wireless charging, and safety information.
Preview How to Prime Your Mainstays 35-Foot Pool Vacuum Hose
Step-by-step guide on how to properly prime your Mainstays 35-foot x 1.5-inch vacuum hose for efficient pool cleaning, including alternate filling tips.