Project Source Flushmount Ceiling Fixture

Care and Maintenance

Shut off the main power supply before performing any maintenance. Periodically clean the fixture using a mild, non-abrasive glass cleaner and a soft cloth. Do not use solvents or cleaners containing abrasive agents, and do not spray liquid cleaner directly onto the bulb or wiring.

Customer Support

For questions, problems, or missing parts, contact Project Source at 866-389-8827 (8 a.m. - 8 p.m., EST, Monday - Sunday) or ascs@lowes.com.

For more information, visit www.lowes.com.

Safety Information

WARNING:

• Installing a fixture into an electrical system without proper grounding can lead to electrical shock, serious injury, or death if wires become broken or loose.
• Wire connectors are not designed to support the weight of this fixture. Suspending the fixture by supply wires and connectors can cause it to fall, resulting in personal injury and the risk of electrical shock or fire.

CAUTION:

• Ensure all electrical connections comply with local codes, ordinances, the National Electrical Code, and ANSI/NFPA 70-199. Hire a qualified electrician if you are unfamiliar with electrical wiring installation.
• Turn off electricity at the main fuse box or circuit breaker box before beginning installation.
• Do not use bulbs with a wattage exceeding the maximum value stated on the fixture, as this can increase temperatures and pose a fire risk.
• All fixtures must be mounted to an outlet box supported by the building structure. Do not support the fixture by drywall alone, as it may fall and cause personal injury.
• Do not connect the fixture's ground wire (green or bare) to the black (hot) or white (neutral) supply wire from the outlet box.
• Do not connect this fixture to an electrical system that does not provide a means for equipment grounding.

Warranty

Project Source warrants its lighting fixtures against defects in materials and workmanship for three (3) years from the date of purchase. If the product is found to be defective within this period, return it with a copy of the bill of sale to the place of purchase. The manufacturer will, at its option, repair, replace, or refund the purchase price. Installation and removal costs are the consumer's responsibility. This warranty does not cover defects due to misuse, accidental damage, or improper handling/installation. It specifically excludes liability for direct, incidental, or consequential damages. Some states may not allow these limitations, so the above may not apply to you. This warranty grants specific rights, and you may have other rights that vary by state.

Quick Reference Guide

Preparation

Before assembly, ensure all parts are present by comparing them with the package contents and hardware lists. Do not assemble if parts are missing or damaged.

Estimated Assembly Time: 35 minutes

Tools Required (Not Included)

No specific tools are listed in the provided text, but standard electrical installation tools are typically required.

Package Contents

• A x 2
• B x 2

Hardware Contents

• AA x 6
• AB x 2
• PP x 4
• QQ x 2
• RR x 2
• YY x 2
• VV x 2
• WW x 4

Installation Overview

Step 1: Turn off power

Turn OFF the electrical power at the main fuse or circuit breaker.

Step 2: Prepare mounting bracket

Attach the mounting bracket (OO) to the outlet box using screws (RR).

Step 3: Connect ground wire

Loosen the ground screw (AB) on the mounting bracket (OO). Wrap the bare wire from the fixture around the ground screw (AB) and tighten it to secure the wire.

Step 4: Connect wires

Connect the black ceiling plate wire to the black supply wire. Connect the white ceiling plate wire to the white supply wire. Connect the ceiling plate ground wire to the supply ground wire. If supply wire colors differ, consult a professional electrician.

Step 5: Mount fixture

Attach the fixture base (A) to the mounting bracket (OO) using screws (AA).

Step 6: Secure glass bowl

Attach the glass bowl (B) to the fixture using screws (VV) and nuts (WW).

Step 7: Install bulbs

Install bulbs (not included). Use 60-watt maximum E26-base LED, CFL, or incandescent bulbs.

Step 8: Restore power

Restore the power at the main fuse or circuit breaker.

Step 9: Final check

Ensure the glass bowl (B) is securely attached. If not, adjust the hex nut on the threaded rod (PP).

Step 10: Final assembly

Complete the fixture assembly as per the diagram.