Project Source 11-Inch LED Outdoor Round Flushmount Light
Model: MXL1182-L130K9027 | Item #: 5632022
Brand: PROJECT SOURCE
Preparation and Assembly
Before starting assembly, verify that all parts are present by comparing them with the package contents and hardware lists. Do not assemble if any part is missing or damaged.
Estimated Assembly Time: 20 minutes.
Tools Required (Not Included): [Refer to manual for specific tools]
Package Contents:
- Part A: Fixture (x1)
- Part AA: Screws (x2)
- Part B: Mounting Bracket (x3)
Hardware Contents:
- AA: Screws (x2)
- B: Mounting Bracket (x3)
Installation Overview
Follow these steps for proper installation:
- Mount the bracket (B) to the junction box using screws (AA).
- Connect the fixture wires to the supply wires: Black wire to black (L/live), white wire to white (N/neutral), and the green ground wire (GND) to the copper or bare ground wire. ?
- Select the desired color temperature for the light. Options include: 2700K Soft White, 3000K Warm White, 4000K Cool White, 5000K Daylight, 6500K Cool Daylight. ?
- Attach the fixture (A) to the mounting bracket (B).
- Secure the fixture in place.
- Ensure all connections are secure and the fixture is properly installed.
For more detailed instructions and diagrams, visit Lowes.com and search for item number 5632022.
Troubleshooting
Fixture does not light:
- Problem: Fixture does not light.
- Possible Cause: Power is off.
- Corrective Action: Check circuit breaker or wall switch. ⚡
- Possible Cause: Incorrect wire connection.
- Corrective Action: Check wire splices.
- Possible Cause: Defective wall switch.
- Corrective Action: Replace wall switch. ?️
Care and Maintenance
Ensure power is turned off before cleaning. Clean the fixture with a mild glass cleaner applied to a soft cloth. Do not spray cleaner directly onto the fixture.
Warranty Information
This fixture is warranted against defects in materials and workmanship for three (3) years from the original purchase date. For warranty service, call 866-389-8827 to obtain a Return Authorization number and further instructions.
Safety Information
WARNING: Ensure the electricity to the wires you are working on is shut off. Either remove the fuse or turn off the circuit breaker. ⚠️
CAUTION: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If interference occurs, the user is encouraged to try to correct it by one or more of the following measures: reorient or relocate the receiving antenna, increase the separation between the equipment and the receiver, connect the equipment into an outlet on a circuit different from that to which the receiver is connected, or consult the dealer or an experienced radio/TV technician for help.
Consult a qualified electrician to ensure correct branch circuit conductor. ??
