Resistex AUREA Ceiling Fan Pole

Safety Notes

Never work when voltage is present on the luminaire.

The installation must be performed by a professional installer in compliance with the standards and regulations relating to electrical installations.

Risk of electrostatic discharges. (ESD Norm). Handle with precautions.

Please observe the notes and steps described in the mounting instructions.

Maintenance Instructions

Do not use chemicals or abrasive products to clean the fixture.

Keep these instructions for dismantling or future maintenance. You can consult additional information about RESISTEX luminaires on the website www.resistex-sa.com.

RESISTEX cannot be responsible for any misuse of the product.

Installation Overview and Dimensions

This section outlines the general mounting requirements and dimensions for the Resistex AUREA ceiling fan pole.

Mounting Clearances

Minimum clearance from the floor: > 760mm.

Minimum clearance from the ceiling: > 2300mm.

Fan diameter: Ø1320mm.

Pole measurements: 160mm and 210mm (referencing diagram points).

Step-by-Step Installation Guide

Step 1: Mounting the Ceiling Bracket

Attach the mounting plate to the ceiling. The plate has a diameter of Ø130mm with Ø6mm holes spaced 80mm apart. The bracket allows for a tilt angle of up to 50°. This step requires four (X4) screws.

Step 2: Wiring and Pole Attachment

Connect the electrical wires according to standard electrical practices. Secure the pole to the mounting structure using the provided hardware, including two (X2) PH2 screws. Ensure proper grounding.

Step 3: Ceiling Mounting Preparation

Prepare the ceiling for mounting. This involves drilling holes, potentially Ø24mm and Ø10mm, with one (X1) screw for the Ø10mm hole, ensuring a secure attachment point.

Step 4: Attaching the Fan to the Pole

Connect the fan assembly to the pole. This typically involves a hook mechanism for temporary support and securing the fan with screws. Four (X4) screws are indicated for this final attachment.

Certifications and Compliance

The Resistex AUREA ceiling fan pole complies with various standards:

• RoHS compliant
• IP20 Protection Rating
• IK06 Impact Resistance
• CE Marking
• [standard 80]