AUREA

Safety Notes

Maintenance Instructions

Installation Overview & Clearances

Diagram 7b shows the ceiling bracket being mounted to the ceiling using screws.

Diagram 8 illustrates attaching the main fan motor unit to the previously mounted ceiling bracket.

Diagram 9 details the electrical wiring connections within the fan unit.

Clearance Requirements (Diagram 10):

• Minimum 760mm (approx. 2.5 ft) from blade tip to wall.
• Minimum 2300mm (approx. 7.5 ft) from floor to blades.

Mounting Box Dimensions (Diagram 10):

• Diameter: Ø1320mm (approx. 4.3 ft)
• Height: 160mm
• Width: 200mm
• Depth: 210mm

Assembly Steps

Step 1: Mount Ceiling Bracket

Diagram 1 shows the ceiling bracket, which has mounting holes of Ø7 x 23mm and Ø30 x 60mm. It is attached to the ceiling. The diagram also indicates [power-off] and [power-on] positions, likely for a power switch.

Step 2: Attach Motor Unit

Diagram 2 shows the motor unit being attached to the ceiling bracket.

Step 3 & 4: Electrical Connections

Diagrams 3 and 4 illustrate the wiring. For the ? Motor LED and VERSION SANS LED (Version without LED), wires are connected to a terminal block. Connections include Neutral (N), Live (L), and Earth (green/yellow wire).

Step 5: Attach Fan Body

Diagram 5 shows the main fan body being attached.

Step 6: Attach Blades

Diagram 6 shows the fan blades being attached to the motor housing using six screws ([PH2 screwdriver] x6).

Step 7a & 7b: Blade Attachment Detail

Diagrams 7a and 7b provide a closer view of how the blades are secured to the motor.