Resistex Aurea Ceiling Fan Installation Instructions

Company Information

RESISTEX EXPLOITATION
11 Quai de la Banquière CS 80010, 06730 Saint-André-de-la-Roche - France
Tél. 0493276276 - Fax 0493276280 - contact@resistex-sa.com
Ape 27402 - Siret 48759347700010 - SAS CAPITAL 649979 € - T.V.A. F.R. 73487593477

Safety Notes

• Never work when voltage is present on the luminaire.
• The installation must be performed by a professional installer in compliance with the standards and regulations relating to electrical installations.
• Risk of electrostatic discharges. (ESD Norm). Handle with precautions.
• Please observe the notes and steps described in the mounting instructions.

Maintenance Instructions

• Do not use chemicals or abrasives products to clean the fixture.
• Keep these instructions for dismantling or future maintenance.
• You can consult additional information about RESISTEX luminaires on the website www.resistex-sa.com.
• RESISTEX cannot be responsible for any misuse of the product.

Mounting / Installation

The following steps detail the assembly and installation process. Please refer to the diagrams for visual guidance.

Step 1: Prepare the Mounting Bracket

Secure the mounting bracket (part 1) to the ceiling using appropriate screws. Ensure it is firmly attached. The diagram shows dimensions for bracket placement and screw holes (Ø7 x 23 mm, Ø30 x 60 mm slot).

Step 2: Assemble the Motor and Canopy

Attach the motor unit (part 3) to the mounting bracket. Connect the LED module (part 4) if applicable (Version AVEC LED). Ensure all connections are secure. The diagram shows the motor and LED connections (N, L).

Step 3: Attach the Fan Blades

For the 'Plafonnier' (ceiling mount) version, assemble the motor housing and canopy cover. For the 'VERSION SANS LED' and 'VERSION AVEC LED' models, attach the fan blades (part 5) to the motor using screws (PH2 x 6).

Step 4: Final Assembly

Ensure all components are securely fastened. The diagram shows the final assembly of the fan blades and motor housing.

Diagram Information

Ceiling Clearance: Minimum clearance of 760mm from the ceiling to the fan blades is recommended. Ensure a minimum height of 2300mm from the floor to the blades.

Fan Dimensions: The fan has a diameter of Ø1320 mm. The motor housing dimensions are approximately 200mm in height, 160mm in diameter, with a canopy diameter of 210mm.

Tools Required: Phillips head screwdriver (PH2) is indicated for most screw types.

Electrical Connection: Connect the wires according to the diagram (N for Neutral, L for Live).