SONGESAND 3-Drawer Chest Assembly Instructions

Safety First

⚠️ WARNING!

Children have died from furniture tipover.

To reduce the risk of furniture tipover:

✅ ALWAYS install the provided anti-tip device.
❌ NEVER put a TV on this product.
❌ NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
❌ NEVER open more than one drawer at a time.
➡️ Place heaviest items in the lowest drawers.
✅ Read and follow each step of the instruction carefully.

Tools and Hardware

The following tools are recommended for assembly:

Screwdriver (Phillips head) ?
Screwdriver (Flat head) ?
Hammer ?
Drill (for wall mounting) ?️

All necessary hardware is included. Please refer to the diagrams for specific part numbers and quantities.

Hardware Overview:

Dowels (e.g., 118331, 101345)
Cam Locks (e.g., 119250)
Cam Lock Screws (e.g., 119252, 119030, 117434)
Various Screws (e.g., 105248, 146114, 109049, 100823, 109567, 100408, 145718, 159553)
Drawer Handles (e.g., 157426, 153548, 158568)
Drawer Slides (e.g., 10047099)
Anti-tip hardware (Bracket: 106989, Screws: 109567, Plugs: 10087223, Washers: 100823)

Assembly Steps

Step 1 (Page 5)

Prepare base and side panels, attach drawer slides and handles.

Insert 14x dowels (118331) and 22x dowels (101345). Attach 5x handles (153548/158568) to drawer fronts. Attach 3x drawer slides (10047099) to side panels.

Parts used: 14x 118331, 22x 101345, 5x 153548/158568, 3x 10047099.

Step 2 (Page 6)

Assemble main cabinet frame components.

Insert 12x dowels (118331) and 12x dowels (101345). Attach 3x handles (157426) and 1x support piece (158473). Use 6x screws (100408).

Parts used: 12x 118331, 12x 101345, 3x 157426, 1x 158473, 6x 100408.

Step 3 (Page 7)

Connect cabinet side panels to base.

Attach side panels to the base using 9x screws (146114) and 9x cam lock screws (10047099) with cam locks (not explicitly numbered here but implied by diagram).

Parts used: 9x 146114, 9x 10047099 (cam lock screws), implied cam locks.

Step 4 (Page 8)

Attach drawer runners and supports.

Insert 10x dowels (118331) into side panels. Attach drawer runners using 16x screws (101345).

Parts used: 10x 118331, 16x 101345.

Step 5 (Page 9)

Attach horizontal and vertical supports.

Diagram shows attaching horizontal supports to side panels.

Step 6 (Page 10)

Attach vertical supports.

Insert dowels (101345) into side panels and attach vertical supports.

Parts used: 101345.

Step 7 (Page 10)

Connect cabinet sides.

Diagram shows connecting cabinet sides using dowels and screws.

Step 8 (Page 11)

Secure cabinet sides with cam locks.

Insert 2x sets of cam locks (119252/119250) into the designated holes and turn to lock.

Parts used: 2x 119252, 2x 119250.

Step 9 (Page 11)

Attach back panels.

Slide the back panels into the grooves on the cabinet frame.

Step 10 (Page 12)

Secure cabinet structure.

Insert 3x sets of cam locks (119252/119250) to secure the structure.

Parts used: 3x 119252, 3x 119250.

Step 11 (Page 12)

Attach bottom panel.

Secure the bottom panel using 1x screw (105248) and 1x screw (158473).

Parts used: 1x 105248, 1x 158473.

Step 12 (Page 13)

Attach top panel.

Place the top panel onto the assembled cabinet structure.

Step 13 (Page 13)

Secure top panel with cam locks.

Insert 5x sets of cam locks (119252/119250) to secure the top panel.

Parts used: 5x 119252, 5x 119250.

Step 14 (Page 14)

Attach top support.

Secure the top support using 1x screw (105248) on each side.

Parts used: 2x 105248.

Step 15 (Page 14)

Attach drawer front supports.

Attach the drawer front support pieces using 4x screws (implied by diagram, likely 105248 or similar).

Parts used: 4x screws.

Step 16 (Page 15)

Attach anti-tip bracket to furniture.

Attach the anti-tip bracket (106989) to the top rear of the furniture using 2x screws (109049) and 2x washers (100823).

Parts used: 1x 106989, 2x 109049, 2x 100823.

Step 17 (Page 15)

Prepare drawer components.

Insert 4x dowels (118331) into the drawer side panels.

Parts used: 4x 118331.

Step 18 (Page 16)

Assemble drawer boxes.

Connect the drawer side panels to the drawer base using 4x dowels (101345).

Parts used: 4x 101345.

Step 19 (Page 17)

Attach drawer fronts.

Align and attach the drawer fronts to the assembled drawer boxes.

Step 20 (Page 17)

Secure drawer fronts with cam locks.

Insert 4x sets of cam locks (119252/119250) to secure the drawer fronts.

Parts used: 4x 119252, 4x 119250.

Step 21 (Page 18)

Attach drawer handles.

Attach drawer handles (implied by diagram, likely 157426 or similar) using screws.

Step 22 (Page 18)

Insert drawers into the cabinet.

Slide the assembled drawers into the cabinet on their respective slides.

Step 23 (Page 19)

Wall Mounting Guide.

The screw(s) and plug(s) supplied can be used with most solid (A) and hollow (B) walls. For solid wood (C) use the screw(s) without plug(s). If you are uncertain, seek professional advice.

Diagram A shows a screw in a solid wall. Diagram B shows a screw and plug in a hollow wall. Diagram C shows a screw in solid wood.

Step 1: Drill a hole of appropriate size (e.g., 8mm for solid walls, 30mm deep for hollow walls).

Step 2: Insert the plug into the hole if using for hollow walls.

Step 3: Secure the furniture to the wall using the provided bracket and screws.

Step 24 (Page 20)

Final attachment of anti-tip hardware to wall.

Attach the other end of the anti-tip strap/bracket to the wall using 2x screws (109567) and 2x wall plugs (10087223).

Parts used: 2x 109567, 2x 10087223.

Step 25 (Page 21)

Prepare drawer components.

Insert 4x dowels (118331) into drawer side panels.

Parts used: 4x 118331.

Step 26 (Page 21)

Assemble drawer boxes.

Assemble drawer boxes using 4x dowels (101345).

Parts used: 4x 101345.

Step 27 (Page 22)

Connect cabinet sides.

Diagram shows connecting cabinet sides.

Step 28 (Page 22)

Secure cabinet sides with cam locks.

Insert 4x sets of cam locks (119030/117434) to secure the cabinet sides.

Parts used: 4x 119030, 4x 117434.

Step 29 (Page 22)

Attach back panel.

Slide the back panel into the grooves of the cabinet.

Step 30 (Page 23)

Secure top panel.

Attach the top panel and secure it.

Step 31 (Page 23)

Attach drawer runners.

Attach drawer runners using 4x screws (145718/159553).

Parts used: 4x 145718/159553.

Step 32 (Page 23)

Secure assembly with cam locks.

Insert 4x sets of cam locks (119030/117434) to secure the assembly.