SONGESAND 6-Drawer Chest Assembly Instructions
Important Safety Information
⚠️ WARNING! Children have died from furniture tipover.
To reduce the risk of furniture tipover:
- ALWAYS install the provided anti-tip device. ?
- NEVER put a TV on this product. ❌?
- NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves. ❌?
- NEVER open more than one drawer at a time. ❌↔️
- Place heaviest items in the lowest drawers. ⬇️?
- Read and follow each step of the instruction carefully. ✔️?
Tools Required
?️ Tools needed for assembly include:
- Screwdrivers (Phillips and flathead)
- Hammer
- Drill with drill bits (⌀ 5/16" (8 mm) and ⌀ 1/8" (3 mm))
Parts Overview
Refer to the diagrams for specific part identification and quantities. Key components include:
- Screws (various types and sizes, e.g., 10047099, 118331, 101345, 105248, 146114, 109570, 100408, 145718, 159553)
- Dowels (e.g., 101345, 119252, 119250)
- Cam Locks and Posts (e.g., 10093082, 10093081, 158473, 157426, 119030, 117434)
- Drawer Slides (e.g., 109570, 10047099)
- Handles (e.g., 153548, 158568, 157426)
- Wall Mounting Hardware (brackets, screws, plugs)
Assembly Steps
Step 1
Attach two side panels to a base panel using 15x screw (10047099) and 15x cam post (146114).
Step 2
Attach another set of side panels to a base panel using 14x screw (118331).
Step 3
Connect horizontal support pieces using 18x dowel (101345).
Step 4
Attach a handle (153548 or 158568) to a panel using screws.
Step 5
Insert dowels (101345) into designated holes on panels.
Step 6
Attach a horizontal support piece using screws (101345).
Step 7
Insert dowels (101345) into designated holes on panels.
Step 8
Attach cam lock housings (119252, 119250) to panels. Use 2x.
Step 9
Attach a back panel to the structure.
Step 10
Attach side panels to the base structure.
Step 11
Attach cam lock housings (119252, 119250) to the structure. Use 5x.
Step 12
Attach drawer slide components (105248) to the side panels using screws (158473). Use 1x.
Step 13
Place the top panel onto the assembled structure.
Step 14
Attach cam lock housings (119252, 119250) to the top panel. Use 7x.
Step 15
Attach drawer slide components (105248) to the side panels using screws (105248). Use 1x.
Step 16
Attach a panel using 2x dowel (101345).
Step 17
Attach drawer slides (10047099) to panels using 3x screws (146114).
Step 18
Attach drawer slides (10047099) to panels using 3x screws (146114).
Step 19 (Wall Mounting)
Attach wall mounting bracket (109049 or 100823) using screws (106989) and wall plugs (109567). Use 2x.
Step 20
Attach drawer slides (118331) to drawer side panels using 6x screws (109049).
Step 21
Attach a side panel to the base of the drawer unit.
Step 22
Attach cam lock housings (119252, 119250) to the drawer unit structure. Use 2x.
Step 23
Attach dowels (101345) to the top panel of the drawer unit. Use 4x.
Step 24
Insert an assembled drawer unit into the main frame.
Step 25
Attach cam lock housings (119252, 119250) to the drawer unit. Use 4x.
Step 26
Insert drawer bottom panels into the grooves.
Step 27
Attach drawer front/back panels using cam lock housings (10093082, 10093081). Use 4x.
Step 28
Attach drawer side panels to drawer fronts using handles (153548, 158568). Use 4x.
Step 29
Attach drawer fronts to the drawer boxes using cam locks (10093081, 10093082). Use 10x.
Step 30
Attach drawer slides to the main unit frame. Use 2x.
Step 31
Insert the assembled drawers into the main unit.
Step 32 (Wall Mounting Guide)
Instructions for securing the furniture to the wall:
- For solid walls (A) and hollow walls (B), use the supplied screws and plugs.
- For solid wood (C), use screws without plugs.
- If uncertain, seek professional advice.
- Visit www.IKEA.com/secure-it for more information.
Step 33
Attach wall mounting bracket (109567, 100823) to the top of the unit. Use 2x.
Step 34
Assemble drawer boxes: 4x small drawers, 2x large drawers. Use dowels (101345).
Step 35
Attach drawer slides (118331) to the drawer sides using 4x screws each.
Step 36
Important: Ensure the unit is stable and properly secured to prevent tipover. ⚠️
Attach side panels to the base.
Step 37
Attach cam lock housings (119030, 117434) to drawer sides. Use 4x each.
Step 38
Insert drawer bottom panels into the grooves.
Step 39
Attach the top panel to the main unit.
Step 40
Attach drawer sides to drawer fronts using 4x screws (145718, 159553).
Step 41
Attach cam lock housings (119030, 117434) to drawer fronts. Use 4x.
Step 42
Attach drawer slides (10047099) to the assembled drawer boxes. Use 2x.
Step 43
Attach drawer slides (146114) to the assembled drawer boxes. Use 4x.
Step 44
Attach handles (157426) to the drawer fronts using 2x screws (100408).
Step 45
Insert the assembled drawers into the main unit. Ensure they slide smoothly. ⚠️ Check for stability.
Step 46
Continue inserting drawers into the unit.
Step 47
Attach drawer fronts to the drawer boxes using screws (109570).
Step 48
Final check and insertion of all drawers. Ensure the unit is stable.
IKEA.com/secure-it
