SONGESAND 3-Drawer Chest Assembly Instructions
Model: AA-2400387-2
Important Safety Information
WARNING! Children have died from furniture tipover. To reduce the risk of furniture tipover:
- ALWAYS install anti-tip device provided.
- NEVER put a TV on this product.
- NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
- NEVER open more than one drawer at a time.
- Place heaviest items in the lowest drawers.
- Read and follow each step of the instruction carefully.
Assembly Instructions
-
Attach the two side panels (Part 109567) to the base panel (Part 10087223) using four screws (Part 109049) and four dowels (Part 100823). Ensure the panels are flush.
Parts used: 2x 109567, 1x 10087223, 4x 109049, 4x 100823.
-
Insert dowels (Part 106989) into the top panel (Part 370766). Attach the top panel to the assembled side panels using screws (Part 100823).
Parts used: 1x 370766, 2x 106989, 4x 100823.
-
Attach drawer slides (Parts 119252 and 119250) to the inside of the side panels using screws (Part 101345). Ensure they are oriented correctly.
Parts used: 2x 119252, 2x 119250, 4x 101345 (per side panel).
-
Assemble the drawer box: Attach drawer sides (Part 157426) to the drawer back (Part 100408) using screws (Part 118331). Slide the drawer bottom panel (Part 100408) into the grooves.
Parts used: 2x 157426, 1x 100408, 2x 118331.
-
Attach the drawer front panel (Part 158473) to the assembled drawer box. Insert cam bolts (Part 146114) into the drawer front and secure them with cam locks (Part 105248) inserted into the drawer sides.
Parts used: 1x 158473, 2x 146114, 2x 105248.
-
Attach the drawer handle (Part 151583556488) to the drawer front using screws (Part 101345).
Parts used: 1x 151583556488, 2x 101345.
-
Insert the assembled drawer into the chest frame. Attach the corresponding drawer runners (Parts 111912952052, 119030, 117434, 114559751853) to the chest frame using screws (Part 101345). Ensure they align with the drawer slides.
Parts used: Various drawer runners, 4x 101345 (per runner set).
-
Repeat steps 4 through 7 for the remaining drawers.
-
Attach the thin back panel (Part 10047099) to the rear of the assembled chest using screws (Part 146114).
Parts used: 1x 10047099, 4x 146114.
Wall Mounting
The screw(s) and plug(s) supplied can be used with most solid (A) and hollow (B) walls. For solid wood (C) use the screw(s) without plug(s). If you are uncertain, seek professional advice.
Wall Type A (Solid Walls): Use screws (Part 10047099) with plugs (Part 153548).
Wall Type B (Hollow Walls): Use screws (Part 153548) with plugs (Part 158568).
Wall Type C (Solid Wood): Use screws (Part 118331) without plugs.
Secure the furniture to the wall using the provided anti-tip hardware. Visit www.IKEA.com/secure-it for detailed instructions.
