Blackview COLOR 8
Enjoy Smart Life
Website: http://www.blackview.hk
Device Overview
Front View:
- Screen
- Front Camera
- Receiver
- Microphone
- Headphone Jack
- Speaker
- Type-C Port
Side/Back View:
- SIM/TF Card Slot
- Camera
- Flashlight
- Volume+ Button
- Volume- Button
- Power Button / Fingerprint Scanner
How to Insert the Card
To ensure your smartphone can make calls, insert the SIM card in the following order:
- Press the card pin into the side hole to pop up the card tray. Pull out the tray.
- Place the Nano SIM card or Nano SIM card and TF card into the card slot with the metal side facing down. Ensure the beveled angle of the card aligns with the beveled angle of the card slot.
- Insert the card holder back into the phone in the direction of the arrow.
How to Boot
Non-removable battery: Press the power button for 3-5 seconds to boot the device.
How to Send SMS, MMS
SMS
- Open the SMS app.
- Select "New Information".
- Enter a phone number or browse your contacts.
- Select "Edit Information" and enter your text.
- Send.
MMS - Video
- When writing a text message, select images, videos, or other files to add. You can also take a new picture or video.
- Select or send.
Language Switching Settings
- Navigate to Main Menu > Settings > System > Language and input method.
- Select "Language and input method" > "Language" > "Language adding".
- Select the desired language. The system will automatically return to the language interface.
- Drag the icon next to the language bar to the first position.
SAR Information
The maximum electromagnetic radiation absorption ratio (SAR) for this product is ≤2.0W/kg, in line with the national standard GB 21288-2007.
Safety - In Order to Ensure Safely Using the Product
Adhere strictly to the following rules:
- Keep the phone at least 15 cm away from any medical implant or rhythm adjuster. Do not place the device in your coat pocket.
- Do not expose the device or batteries to high temperatures or heat-generating equipment (e.g., sunlight, heaters, microwave ovens, water heaters). Overheating can cause an explosion.
- When charging is complete or not charging, disconnect the charger from the device and unplug it from the power outlet.
- If the device has a non-removable battery, do not attempt to replace it yourself to avoid damaging the battery or device.
- Using an unapproved or incompatible power source, charger, or battery may cause fire, explosion, or other hazards.
- Do not disassemble or reset the battery. Do not insert other objects, immerse in water, or expose to other liquids to prevent battery leakage, overheating, fire, or explosion.
- Do not drop, crush, scratch, or puncture the battery. Avoid excessive external pressure that could lead to internal short-circuit and overheating.
- The company is not responsible for accidents caused by non-standard charging equipment.
- Shenzhen DOKE Electronic Co., Ltd declares that this radio equipment is in compliance with Directive 2014/53/EU. The full EU declaration of conformity is available at: https://www.blackview.hk/ce/
Maintenance
- Understand the maintenance procedures for this mobile phone to use it more safely and effectively, extending its service life.
- Follow the manual's instructions for opening the phone and disassembling accessories. Do not attempt other methods.
- Avoid dropping, knocking, or shaking the phone. Rough handling can cause screen rupture or damage to the internal circuit board and delicate structure.
- Do not use chemical solvents or detergents to clean the phone. Wipe the phone case with a soft cotton cloth dampened with water or mild soap.
- Clean the lens (e.g., camera lens) and display with a clean, dry, soft cloth.
- If you encounter an abnormal image (e.g., a crash), use the following processing method: For phones with non-removable batteries, press and hold the power button for over 12 seconds to force a restart. For phones with removable batteries, remove and reinsert the battery, then restart.
- When the charger is not in use, unplug it from the power outlet. Do not leave a fully charged battery connected to the charger for extended periods, as overcharging shortens battery life.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) Information
This smartphone meets the government's requirements for exposure to radio waves. The guidelines are based on standards developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: COLOR 8 (FCC ID: 2A7DX-COLOR8) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 0.350W/kg and when properly worn on the body is 0.644W/kg. This device was tested for typical body-worn operations with the back of the handset kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters, and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Use only the supplied or an approved antenna.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user's body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
IC Warning
English: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3(B)/NMB-3(B).
French: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to cochannel mobile satellite systems.
Les équipements fonctionnant dans la bande 5150-5250 MHz sont destinés à une utilisation intérieure uniquement afin de réduire les risques de brouillage préjudiciable pour les systèmes mobiles par satellite dans le même canal.
Specific Absorption Rate (SAR) Information
This device meets the government's requirements for Canada radiation exposure limits set forth for an uncontrolled environment. This device was tested for typical body-worn operations with the back of the phone kept 10 mm from the body. To maintain compliance with ISED RF exposure requirements, use accessories that maintain an 10 mm separation distance between the user's body and the back of the Phone. The use of belt clips, holsters, and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with ISED RF exposure requirements, and should be avoided.
Informations sur le débit d'absorption spécifique (DAS)
Cet appareil répond aux exigences du gouvernement en matière de limites d'exposition aux radiations au Canada établies pour un environnement non contrôlé. Cet appareil a été testé pour des opérations typiques portées sur le corps, l'arrière du téléphone étant maintenu à 10 mm du corps. Pour maintenir la conformité aux exigences d'ISDE en matière d'exposition aux RF, utilisez des accessoires qui maintiennent une distance de séparation de 10 mm entre le corps de l'utilisateur et l'arrière du téléphone. L'utilisation de clips de ceinture, d'étuis et d'accessoires similaires ne doit pas contenir de composants métalliques dans son assemblage. L'utilisation d'accessoires qui ne satisfont pas à ces exigences peut ne pas être conforme aux exigences d'exposition aux RF d'ISDE et doit être évitée.
Community
Follow Blackview community, a place where you can share and discuss with Blackview users. Keep posted with most up-to-day news.