Blackview WAVE 8C Series Smartphone

Device Overview

Screen: The main display area of the smartphone.

Receiver: Used for audio during calls.

Front Camera: For taking selfies and video calls.

Headphone Jack: Port for connecting wired headphones.

Microphone: Captures audio for calls and recordings.

Speaker: Outputs audio for notifications, media, and calls.

Charger/Type-C Port: For charging the device and data transfer.

Device Exterior

Volume +: Button to increase volume.

Volume -: Button to decrease volume.

Camera: The rear camera system.

Flashlight: Provides illumination.

TF/SIM Card: Slot for inserting a SIM card and/or a TF (microSD) card.

Power Key: Button to turn the device on/off or put it to sleep.

How to Insert the Card

To ensure your smartphone can make calls, insert the SIM card as follows:

1. Press the card pin into the side hole to eject the card tray.
2. Remove the card tray and place the Nano SIM card or Nano SIM card and TF card with the metal side facing down. Ensure the beveled edge of the card aligns with the beveled edge of the card slot.
3. Insert the card holder back into the phone in the direction of the arrow.

Basic Operations

How to Boot

The battery is non-removable. Press and hold the power button for 3-5 seconds to boot the device.

How to Send SMS, MMS

SMS:

• Open the SMS app.
• Select 'New Information'.
• Enter a phone number or browse your contacts.
• Select 'Edit Information' and enter your text.
• Tap 'Send'. ▶️

MMS - video:

• When writing a text message, select images, videos, or other files to add. You can also take a new picture or video directly.
• Tap 'Selecting or sending'. ▶️

Language Switching Settings

• Navigate to Main menu > Settings > System > Language and input method.
• Select 'Language and input method' > 'Language' > 'Language adding'.
• Select your desired language. The system will automatically switch to the selected language interface.
• Select the language icon in the language bar and drag it to the first position.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

RF Exposure Statement

SAR tests are conducted using standard operating positions according to FCC standards with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value.

This model product has been tested and meets the FCC RF exposure guidelines with the test distance 0 mm for head and 10mm for body worn. The highest SAR₁g value is 0.889 W/Kg. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC exposure requirements, and should be avoided.

ISED Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) L'appareil ne doit pas produire de brouillage; (2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

ISED RF Exposure Statement

SAR tests are conducted using standard operating positions according to ISED standards with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value.

This model product has been tested and meets the ISED RF exposure guidelines with the SAR test with distance 0 mm for head and 10mm for body worn. The highest SAR₁g value is 0.889 W/Kg. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with RF exposure requirements, and should be avoided.

Les tests SAR sont effectués en utilisant des positions de fonctionnement standard conformément aux normes ISDE avec l'appareil transmettant à son niveau de puissance certifié le plus élevé dans toutes les bandes de fréquences testées, bien que le SAR soit déterminé au niveau de puissance certifié le plus élevé, le niveau SAR réel de l'appareil pendant le fonctionnement peut être bien inférieur à la valeur maximale.

Ce modèle de produit a été testé et répond aux directives d'exposition RF ISDE avec le test SAR à une distance de 0 mm pour la tête et de 10 mm pour le corps. La valeur SAR₁g la plus élevée est de 0,889 W/Kg. L'utilisation de clips de ceinture, d'étuis et d'accessoires similaires ne doit pas contenir de composants métalliques dans son assemblage. L'utilisation d'accessoires qui ne satisfont pas à ces exigences peut ne pas être conforme aux exigences d'exposition RF et doit être évitée.

The device is restricted to indoor use only when operating in the 5150 to 5250MHz frequency range. L'appareil est limité à une utilisation en intérieur uniquement lorsqu'il fonctionne dans la plage de fréquences de 5 150 à 5 250 MHz.

Blackview Community

Follow the Blackview community, a place where you can share and discuss with other Blackview users. Keep posted with the most up-to-date news.