Blackview WAVE 9C Series

Front View

A diagram shows the front of the smartphone. Key components labeled are: Screen, Front Camera, Receiver, Microphone, Speaker, Headphone Jack, and Charger/Type-C Port.

Side and Back View

Diagrams illustrate the sides and back of the smartphone. Labeled components include: Volume Up (+) and Volume Down (-) buttons, Camera module with lenses, Flashlight, TF/SIM Card slot, and the Power Key which also functions as a Fingerprint Scanner.

Getting Started

How to Insert the Card

To ensure your smartphone can make calls, insert the SIM card in the following order:

• Press the card pin into the side hole; the card tray will pop up. Pull it out.
• Take out the card slot. Place the Nano card or Nano card and TF card with the metal side facing down.
• Ensure the bevel angle of the card aligns with the bevel angle of the card slot and place it in the corresponding slot. The tray has slots labeled 'TF Card', 'SIM 1', and 'SIM 2'.
• Insert the card tray back into the device following the direction of the arrow.

How to Boot

For devices with a non-removable battery, press and hold the power button for 3-5 seconds to boot.

Basic Functions

How to Send SMS, MMS

SMS:

• Open the SMS app.
• Select 'New Information'.
• Enter a phone number or browse your contacts.
• Select 'Edit Information' and enter your text.
• Tap 'Send'.

MMS - Video:

• When writing a text message, select images, videos, or other files you wish to add. You can also take a new picture or video.
• Select 'Selecting or sending'.

Language Switching Settings

Navigate through the settings to change the language:

• Main Menu → Settings → System Setting → Language and Input Method.
• Select 'Language' → 'Language Adding'.
• Choose your desired language. The system will automatically return to the language interface.
• Select the language icon after the language bar and drag it to the first position to set it as primary.

Safety and Compliance

SAR (Specific Absorption Rate)

For countries adopting a SAR limit of 2.0 W/kg over 10 grams of tissue, the device complies with RF specifications when used at a distance of 5mm from the body.

For countries adopting a SAR limit of 1.6 W/kg over 1 gram of tissue, the device complies with RF specifications when used near the ear or at a distance of 10mm from the body.

SAR information can be viewed online at: http://www.fcc.gov/oet/ea/fccid/

Safety Guidelines

To ensure safe usage of the product, strictly abide by the following rules:

• Keep the phone at least 15 cm away from any medical implant or rhythm adjuster. Do not place the device in your coat pocket.
• Do not expose the device or batteries to high temperatures or heat-generating equipment (e.g., sunlight, heaters, microwave ovens, ovens, water heaters). Overheating can cause an explosion.
• When charging is complete or not charging, disconnect the charger from the device and unplug it from the power outlet.
• If the device has a non-removable battery, do not attempt to replace it yourself to avoid damaging the battery or device.
• Using an unapproved or incompatible power source, charger, or battery may cause fire, explosion, or other hazards.
• Do not disassemble or reset the battery. Do not insert objects, immerse in water, or other liquids to avoid battery leakage, overheating, fire, or explosion.
• Do not drop, crush, scratch, or puncture the battery to prevent excessive external pressure, which could lead to internal short-circuit and overheating.
• The company is not responsible for accidents caused by non-standard charging equipment.

EU Declaration of Conformity

Shenzhen DOKE Electronic Co., Ltd declares that this radio equipment type is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://support.blackview.hk/download/2

CE Caution

⚠️ Use caution with earphones, as excessive sound pressure can cause hearing loss.

According to Article 10 (10) of Directive 2014/53/EU, this radio equipment may be subject to restrictions when placed on the market in the following countries:

Belgium (BE), Bulgaria (BG), Czech Republic (CZ), Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain (ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania (LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria (AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden (SE), Turkey (TR), Norway (NO), Switzerland (CH), Iceland (IS), and Liechtenstein (LI).

The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range.

Country Codes Table:

ES LU RO CZ FR

HU SI DK HR BE

BG DE EE IE EL

IT CY LV LT SK

MT NL AT PL PT

FI SE TR NO CH

IS LI

Declaration: Our equipment, including 5G Wi-Fi, meets the above EU Standards. If not, they do not meet the standards.

The object of the declaration is in conformity with the essential requirements of the relevant Union harmonization legislation: Radio Equipment Directive RED (2014/53/EU).

FCC Caution

Note:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• (1) This device may not cause harmful interference, and
• (2) This device must accept any interference received, including interference that may cause undesired operation.

This product meets government requirements for exposure to radio waves. The guidelines are based on standards developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. These standards include a substantial safety margin to assure the safety of all persons regardless of age or health.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for assistance.

IC Caution (Canada)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

• This device may not cause interference.
• This device must accept any interference, including interference that may cause undesired operation of the device.

This Class [B] digital apparatus complies with Canadian ICE-003.

Français: L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: L'appareil ne doit pas produire de brouillage; L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

IC SAR Statement: Mobile Phone has been tested and meets applicable limits for radio frequency (RF) exposure. Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. The SAR limit is 1.6 watts per kilogram in Canada, averaged over 1 gram of tissue. During testing, Mobile Phone radios are set to their highest transmission levels and placed in positions that simulate uses against the head (with no separation) and when worn or carried against the torso of the body (with 10mm separation). To reduce exposure to RF energy, use a hands-free option, such as the built-in speaker phone, the supplied headphones, or other similar accessories. Cases with metal parts may change the RF performance of the device, including its compliance with RF exposure guidelines, in a manner that has not been tested or certified. Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider's wireless and roaming networks.

Maintenance

To use your mobile phone more safely and effectively, and extend its service life, thoroughly understand its maintenance:

• Follow the instructions in the manual to open the phone and disassemble accessories; do not try other methods.
• Avoid falling, knocking, or shaking your phone. Rough handling can cause screen rupture or damage to the internal circuit board and delicate structure.
• Do not use chemical solvents or detergents to clean your phone. Wipe the phone case with a soft cotton cloth dampened with water or a mild soap.
• Clean the lens (e.g., camera lens) and display with a clean, dry, soft cloth.
• If you encounter an abnormal image (e.g., a crash) during use, the processing method is as follows:
• For phones with non-removable batteries: Press and hold the power button for more than 12 seconds. The phone will force a restart. This can solve general bugs.
• For phones with removable batteries: Remove the battery, then insert it and restart the phone to solve the bug.
• When the charger is not in use, unplug it from the power outlet. Do not connect a fully charged battery to the charger for extended periods, as overcharging will shorten battery life.

Certification

Check Your Certification Number

To check your certification number, follow these steps: Settings → About Phone → Certification.

Community and Specifications

Connect with Us

Follow the Blackview community for a place to share and discuss with other Blackview users and stay updated with the latest news.

Find us on:

• Instagram
• Facebook

Manufacturer Information

Manufacturer: Shenzhen DOKE Electronic Co., Ltd

Address: 801, Building 3, 7th Industrial Zone, Yulv Community, Yutang Road, Guangming District, Shenzhen, China.

Charger Specification

The power delivered by the charger must be between a minimum of 2.5 Watts and a maximum of 10 Watts to achieve the maximum charging speed.