Key Features
- Low Noise
- Preset Limit Switches
- Hall Effect Sensor
- Input Voltage 24VDC
- Stroke 800mm
- IP42 Rating
- Duty Cycle 10%
Product Description
The RS PRO BD61 is a quiet and powerful linear actuator capable of up to 6000N thrust. It is designed for applications in furniture, home care, and fitness equipment. Its slider-type linear motion design enables a larger stroke within a smaller installation size.
Main Applications: Furniture, Home Care, Fitness Equipment.
RS PRO is the own brand of RS. The RS PRO Seal of Approval signifies professional quality, with every part rigorously tested, inspected, and audited against demanding standards. This makes RS PRO the smart choice for customers.
RS Stock No.: 177-4521
Specifications
General Specifications
| Actuator Type | ACME Screw |
|---|---|
| Motor Technology | DC Motor |
| Control | S - Limit Switch, H - Hall Effect x 2 |
| Series | BD61 |
| Colour | Black & Silver |
| Duty Cycle | 10% or 2 min of continuous operation in 20 min. |
| Housing | Plastic molding, and aluminium |
Electrical Specifications
| Input Voltage | 24VDC |
|---|---|
| Current No Load | 0.6A at 24VDC |
| Current Full Load | 2.9A at 24VDC |
| Motor Power | 70W |
| Maximum Acceleration | N/A |
| Maximum Load | 3000N Push / 4000N Pull |
| Maximum Speed No Load | 11.0mm/s |
| Maximum Speed Full Load | 8.2mm/s |
| No Load Torque | N/A |
| Maximum Force Lifting | 3000N |
| Noise Level | ≤53dB |
| Motor | Permanent magnet motor 24V DC / 3300rpm |
| Connection | Black PVC with molded F type 6 Pin DIN plug |
| Positioning Feedback | Hall effect |
Mechanical Specifications
| Maximum Stroke Length | 800mm |
|---|---|
| Brake | N/A |
| Spindle Type | Pitch=8mm |
| Gear Ratio | N/A |
| Front Connector | N/A |
| Rear Connector | Drilled Hole, 10mm |
| Clevis Ends | ACME screw |
| Overall Length Closed | 995mm |
| Weight | 3.24Kg or 3240g |
| Ambient Operation Temperature | -20°C to 65°C |
| Storage Temperature | -20°C to 65°C |
| IP Rating | IP42 |
Approvals
| Compliance/Certifications | CE / EN55014-1:2017+A11:2020 |
|---|---|
| Declarations | EN 55014-2:2015 |
Accessories
| Accessory | Controller | RS PRO Product Number | 1774523 |
|---|---|---|---|
| Accessory | Handset | RS PRO Product Number | 1774527 |
Image description for Controller: A black controller unit with several buttons and a coiled cable attached, connected via a multi-pin connector.
Image description for Handset: A black, cylindrical handset device with a single button and a cable.
Performance Data & Diagrams
Speed vs. Load Graph
This graph illustrates the relationship between load and speed. The X-axis represents Load in Newtons (N), ranging from 0 to 6000N. The Y-axis represents Speed in millimeters per second (mm/s), ranging from 0 to 12 mm/s. The data shows that at 0N load, the speed is approximately 9 mm/s. As the load increases, the speed decreases, reaching approximately 0 mm/s at 6000N. A point labeled "F8" is indicated around 3000N.
Current vs. Load Graph
This graph shows the relationship between load and current consumption. The X-axis represents Load in Newtons (N), from 0 to 6000N. The Y-axis represents Current in Amperes (A), from 0 to 4A. The data indicates that at 0N load, the current is approximately 0.6A. As the load increases, the current consumption rises, reaching approximately 2.9A at 6000N. A point labeled "F8" is indicated around 3000N.
Dimensional Drawings
The main actuator diagram provides key dimensions. The overall length closed is 995mm. Key dimensions include a height of 103.3mm, a width of 178.3mm, and a depth of 94.5mm. The carriage assembly has dimensions A = 127mm and B = 927mm. Other noted dimensions are 65mm, 50mm, 36mm, 26mm, 46mm, 72mm, and a diameter of ø64mm.
Connector Information
Front Connector: Features M6 and M10 connections. It is described as an F type 6 Pin DIN Plug Pin Out, specifically for Hall Effects.
Rear Connector: A 6-pin DIN plug with a 10mm diameter hole. The pinout is detailed as: Hall 2, M-, Vin, M+, Hall 1, and GND.
