RS PRO Linear Actuators
RS Stock No.: 177-4516
The RS PRO Seal of Approval signifies professional quality, with every part rigorously tested, inspected, and audited against demanding standards, making RS PRO the smart choice for customers.
Product Description
The FD60 is a quiet and powerful actuator designed for furniture applications, capable of up to 6000N thrust. Its main application is in furniture.
General Specifications
| Actuator Type | ACME Screw |
| Motor Technology | DC Motor |
| Control | S - Limit Switch, H - Hall Effect Sensor |
| Series | FD60 |
| Colour | Black & Silver |
| Duty Cycle | 10% or 2 min of continuous operation in 20 min. |
| Housing | Plastic moldings, aluminum cover tube |
Electrical Specifications
| Input Voltage | 24VDC |
| Current No Load | 0.6A at 24VDC |
| Current Full Load | 2.8A at 24VDC |
| Motor Power | 67W |
| Maximum Acceleration | N/A |
| Maximum Load | 3000N Push/Pull |
| Maximum Speed No Load | 8.3mm/s |
| Maximum Speed Full Load | 5.0mm/s |
| No Load Torque | N/A |
| Maximum Force Lifting | 3000N |
| Noise Level | ≤ 50dB |
| Motor | Permanent magnet motor 24V DC/ 2500rpm |
| Connection | Black PVC with molded F type 6 pin Din plug |
| Positioning Feedback | Hall effect sensor |
Mechanical Specifications
| Maximum Stroke Length | 100mm |
| Brake | N/A |
| Spindle Type | 8mm pitch |
| Gear Ratio | N/A |
| Front Connector | Drilled Hole, 10mm |
| Rear Connector | Drilled Hole, 10mm |
| Clevis Ends | Yes |
| Screw | ACME screw |
| Overall Length Closed | 320mm |
| Weight | 1.84Kg or 1840g |
| Ambient Operation Temperature | -20°C to 65°C |
| Storage Temperature | -20°C to 65°C |
| IP Rating | IP42 |
Approvals
| Compliance/Certifications | CE / EN55014-1:2017+A11:2020 |
| Declarations | EN 55014-2:2015 |
Accessories
| Accessory | RS PRO Product Number |
|---|---|
| Controller | 1774523 |
| Handset | 1774527 |
(Image description: A black controller unit with cables is shown for the Controller accessory. A black cylindrical handset with a cable is shown for the Handset accessory.)
Other Specifications and Diagrams
Performance Graphs:
- Speed vs. Load (24V DC): The graph shows that the actuator speed decreases as the load increases. At a load of approximately 3000N, the speed is around 5mm/s.
- Current vs. Load (24V DC): The graph indicates that the current drawn by the actuator increases linearly with the load. At a load of approximately 3000N, the current is around 2.8A.
Mechanical Dimensions:
The overall dimensions are detailed. Dimension A is 288mm, and Dimension B is 388mm.
Connector Details
Front Connector: Drilled Hole, 10mm diameter, made of Zinc Alloy, with a Slot Width (W) of 10mm.
Rear Connector: Drilled Hole, 10mm diameter, made of Zinc Alloy, with a Slot Width (W) of 10mm.
F type 6 Pin DIN Plug Pin Out: The plug is a male type. The pin configuration is as follows: GND, Hall 2, Vin, M-, M+, Hall 1. The diameter of the pivot without bushing (D1) is 10mm for both front and rear connectors.
(Image description: A black, angled, 6-pin DIN male connector is shown.)
Buy this product from www.rspro.com
