RS PRO Linear Actuators
RS PRO Linear Actuators - BD61 Series
RS Stock No.: 177-4519
Features
- Low Noise
- Preset Limit Switches
- Hall Effect Sensor
- Input Voltage 24VDC
- Stroke 800mm
- IP42 Rating
- Duty Cycle 10%
Product Description
The RS PRO BD61 is a quiet and powerful linear actuator designed for furniture, home care, and fitness equipment. It provides up to 6000N thrust. The slider-type linear motion design allows for a larger stroke within a smaller installation size.
Main Applications: Furniture, Home Care, Fitness Equipment.
General Specifications
| Actuator Type | ACME Screw |
|---|---|
| Motor Technology | DC Motor |
| Control | S - Limit Switch, H - Hall Effect x 2 |
| Series | BD61 |
| Colour | Black & Silver |
| Duty Cycle | 10% or 2 min of continuous operation in 20 min. |
| Housing | Plastic molding, and aluminium |
Electrical Specifications
| Input Voltage | 24VDC |
|---|---|
| Current No Load | 0.6A at 24VDC |
| Current Full Load | 2.7A at 24VDC |
| Motor Power | 65W |
| Maximum Acceleration | N/A |
| Maximum Load | 3000N Push / 4000N Pull |
| Maximum Speed No Load | 8.3mm/s |
| Maximum Speed Full Load | 5.0mm/s |
| No Load Torque | N/A |
| Maximum Force Lifting | 3000N |
| Noise Level | ≤ 53dB |
| Motor | Permanent magnet motor 24V DC / 2500rpm |
| Connection | Black PVC with molded 8 Pin DIN plug |
| Positioning Feedback | Hall effect |
Mechanical Specifications
| Maximum Stroke Length | 800mm |
|---|---|
| Brake | N/A |
| Spindle Type | Pitch=8mm |
| Gear Ratio | N/A |
| Front Connector | N/A |
| Rear Connector | Drilled Hole, 10mm |
| Clevis Ends | N/A |
| Screw | ACME screw |
| Overall Length Closed | 995mm |
| Weight | 3.24Kg or 3240g |
| Ambient Operation Temperature | -20°C to 65°C |
| Storage Temperature | -20°C to 65°C |
| IP Rating | IP42 |
Approvals
- Compliance/Certifications: CE / EN55014-1:2017+A11:2020
- Declarations: EN 55014-2:2015
Accessories
| Accessory | RS PRO Product Number |
|---|---|
| Controller | 1774523 |
| Handset | 1774527 |
Performance and Dimensional Data
Performance Graphs (24V DC)
- Speed vs. Load: A line graph showing Speed (mm/s) on the Y-axis (ranging from 0 to 40) against Load (N) on the X-axis (ranging from 0 to 6000). The graph indicates that the speed decreases as the load increases, starting at approximately 8.3 mm/s with no load and dropping to approximately 5.0 mm/s at a load of 3000N.
- Current vs. Load: A line graph showing Current (A) on the Y-axis (ranging from 0 to 4) against Load (N) on the X-axis (ranging from 0 to 6000). The graph shows a linear increase in current with load, starting at approximately 0.6A with no load and rising to approximately 2.7A at a load of 3000N.
Dimensional Information
Key Dimensions:
- Dimension A: 127mm
- Dimension B: 927mm
A detailed dimensional drawing illustrates the actuator's physical layout. The overall length closed is 995mm. The drawing indicates mounting points and the motor housing. The front connector is specified as M6 M10 thread. The rear connector is an 8-pin DIN plug with a Ø10mm housing.
Connector Pinout
8 Pin DIN plug Pin Out:
- GND
- Hall 2
- M-
- Vin
- M+
- Hall 1
Buy this product from www.rspro.com.
