Product Overview
The RS PRO BD61 is a quiet and powerful linear actuator designed for furniture, home care, and fitness equipment. Its slider-type linear motion design allows for a larger stroke with a smaller installation size.
Key Features:
- ? Low Noise
- ?️ Preset Limit Switches
- ? Hall Effect Sensor
- ⚡ Input Voltage: 24V DC
- ? Stroke: 400mm
- ?️ IP Rating: IP42
- ? Duty Cycle: 10%
Main Applications: Furniture, Home Care, Fitness Equipment.
Specifications
General Specifications
| Attribute | Value |
|---|---|
| Actuator Type | ACME Screw |
| Motor Technology | DC Motor |
| Control | S - Limit Switch, H - Hall Effect x 2 |
| Series | BD61 |
| Colour | Black & Silver |
| Duty Cycle | 10% or 2 min of continuous operation in 20 min. |
| Housing | Plastic molding, and aluminium |
Electrical Specifications
| Attribute | Value |
|---|---|
| Input Voltage | 24V DC |
| Current No Load | 0.6A at 24V DC |
| Current Full Load | 2.9A at 24V DC |
| Motor Power | 70W |
| Maximum Acceleration | N/A |
| Maximum Load | 3000N [push] / 4000N [pull] |
| Maximum Speed No Load | 11.0mm/s |
| Maximum Speed Full Load | 8.2mm/s |
| No Load Torque | N/A |
| Maximum Force Lifting | 3000N |
| Noise Level | ≤53dB |
| Motor | Permanent magnet motor 24V DC / 3300rpm |
| Connection | Black PVC with molded F type 6 Pin DIN plug |
| Positioning Feedback | Hall effect |
Mechanical Specifications
| Attribute | Value |
|---|---|
| Maximum Stroke Length | 400mm |
| Brake | N/A |
| Spindle Type | Pitch=8mm |
| Gear Ratio | N/A |
| Front Connector | N/A |
| Rear Connector | Drilled Hole, 10mm |
| Clevis Ends | N/A |
| Screw | ACME screw |
| Overall Length Closed | 590mm |
| Weight | 2.48Kg or 2480g |
| Ambient Operation Temperature | -20°C to 65°C |
| Storage Temperature | -20°C to 65°C |
| IP Rating | IP42 |
Approvals and Accessories
Approvals
- Compliance/Certifications: CE / EN55014-1:2017+A11:2020
- Declarations: EN 55014-2:2015
Accessories
| Accessory | RS PRO Product Number |
|---|---|
| Controller | 1774523 |
| Handset | 1774527 |
Technical Diagrams and Details
Speed vs. Load Graph: This graph illustrates the relationship between actuator speed and applied load. The Y-axis represents Speed (mm/s) and the X-axis represents Load (N). The data shows that as the load increases, the speed decreases. At zero load, the speed is approximately 11.0 mm/s. At a load of 3000N, the speed is approximately 8.2 mm/s.
Current vs. Load Graph: This graph shows the relationship between actuator current draw and applied load. The Y-axis represents Current (A) and the X-axis represents Load (N). The current increases linearly with the load. At zero load, the current is approximately 0.6A. At a load of 3000N, the current is approximately 2.9A.
Dimensional Information:
- Dimension A: 127mm
- Dimension B: 527mm
- Other key dimensions indicated in diagrams include: 94.5mm, 50mm, 36mm, 52mm, 103.3mm, 178.3mm, 77.2mm, 72mm, 47mm, 26mm, 65mm, 39.5mm.
Connector Details:
- Front Connector: M6 M10. This is an F type 6 Pin DIN Plug, with pinout for Hall Effects.
- Rear Connector: A F-type DIN male plug. The pins are labeled as follows: [ground], [voltage-in] (Vin), [hall-sensor-1] (Hall 1), [hall-sensor-2] (Hall 2), [signal-plus] (M+), and [signal-minus] (M-).
