RS PRO Linear Actuators
RS Stock No.: 177-4517
Features
- Compact Design
- Preset Limit Switches
- Hall Effect Sensors
- Input Voltage 24VDC
- Stroke 300mm
- IP42 Rating
- Duty Cycle 10%
Product Description
The RS PRO FD60 is a quiet and powerful linear actuator designed for furniture applications, capable of up to 6000N thrust.
Main Application: Furniture
General Specifications
| Actuator Type | ACME Screw |
| Motor Technology | DC Motor |
| Control | S - Limit Switch, H - Hall Effect Sensor |
| Series | FD60 |
| Colour | Black & Silver |
| Duty Cycle | 10% or 2 min of continuous operation in 20 min. |
| Housing | Plastic moldings, aluminum cover tube |
Electrical Specifications
| Input Voltage | 24VDC |
| Current No Load | 0.6A at 24VDC |
| Current Full Load | 2.8A at 24VDC |
| Motor Power | 64W |
| Maximum Acceleration | N/A |
| Maximum Load | 3000N Push/Pull |
| Maximum Speed No Load | 8.3mm/s |
| Maximum Speed Full Load | 5.0mm/s |
| No Load Torque | N/A |
| Maximum Force Lifting | 3000N |
| Noise Level | ≤50dB |
| Motor | Permanent magnet motor 24V DC/ 2500rpm |
| Connection | Black PVC with molded F type 6 pin Din plug |
| Positioning Feedback | Hall effect sensor |
Mechanical Specifications
| Maximum Stroke Length | 300mm |
| Brake | N/A |
| Spindle Type | 8mm pitch |
| Gear Ratio | N/A |
| Front Connector | Drilled Hole, 10mm |
| Rear Connector | Drilled Hole, 10mm |
| Clevis Ends | Yes |
| Screw | ACME screw |
| Overall Length Closed | 520mm |
| Weight | 2.30Kg or 2300g |
| Ambient Operation Temperature | -20°C to 65°C |
| Storage Temperature | -20°C to 65°C |
| IP Rating | IP42 |
Approvals
| Compliance/Certifications | CE / EN55014-1:2017+A11:2020 |
| Declarations | EN 55014-2:2015 |
Accessories
| Accessory | RS PRO Product Number |
| Controller | 1774523 |
| Handset | 1774527 |
Performance Graphs
Speed vs. Load (24V DC): The graph shows actuator speed (mm/s) on the y-axis against Load (N) on the x-axis. Speed decreases from approximately 30mm/s at 0N load to about 5mm/s at 3000N load.
Current vs. Load (24V DC): The graph shows current (A) on the y-axis against Load (N) on the x-axis. Current increases linearly from approximately 0.6A at 0N load to about 2.8A at 3000N load.
Dimensions and Connections
Overall Dimensions
| Dimension A | 488mm |
| Dimension B | 788mm |
Detailed dimensional drawings are provided, showing the actuator's physical layout and key measurements.
Connector Details
Front Connector
Material: Zinc Alloy
Diameter of pivot without bushing (D1): Ø10 mm
Slot Width (W): 10 mm
Rear Connector
Material: Zinc Alloy
Diameter of pivot without bushing: Ø10 mm
Slot Width: 10 mm
F Type 6 Pin DIN Plug Pin Out
This plug is used for positioning feedback with dual Hall effect sensors. The pin assignments are:
- GND
- Hall 2
- Vin
- M+
- M-
- Hall 1
A visual representation of the F-type DIN male plug is available.
