ALLPOWERS R600 Portable Power Station

1. Safety Precautions

Please read and strictly adhere to the following safety instructions to prevent injury or damage.

• Keep out of reach of children and pets.
• Do not expose to rain or moisture. Do not immerse in water.
• Do not place near fire or heat sources.
• Do not short-circuit the terminals with conductive objects.
• Do not block the ventilation ports during use or charging to prevent overheating.
• Use only the provided cables. Do not disassemble or modify the unit.
• Do not use the product if it is damaged.
• Avoid using in areas with strong electromagnetic fields.

2. Specifications

Basic Specifications

• Dimensions: 285mm x 195mm x 190mm
• Weight: 8.48kg
• Battery Type: Lithium Iron Phosphate (LiFePO4)
• Battery Capacity: 518Wh
• Cycle Life: Over 3500 cycles (80% capacity remaining)

Input Specifications

• AC Input: 100-120V~60Hz, 220-240V~50Hz (depending on region)
• Solar/DC Input: XT60, 12-24V, up to 10A
• Carport Input: 12V/24V, up to 8A

Output Specifications

• AC Output: 600W continuous, 1200W surge (Pure Sine Wave)
• USB-A Output: 5V/2.4A (x2)
• USB-C Output: 100W PD
• DC Output: 12V/10A (x2)
• Wireless Charging: 15W

Operating Environment

• Operating Temperature: -10°C to 40°C (14°F to 104°F)
• Charging Temperature: 0°C to 40°C (32°F to 104°F)

Certifications

• FCC, CE, UKCA, RoHS, UN38.3, PSE

UPS Function

• Switchover Time: < 20ms

3. How to Use

3.1 Product Overview

The R600 features various ports for input and output, including AC outlets, USB ports, a DC output, and an XT60 solar input. It also has a wireless charging pad on top.

3.2 LCD Display

The LCD screen displays battery level, input power, output power, remaining operating time, and error codes.

3.3 Charging the Power Station

• AC Charging: Connect the AC adapter to the AC input port.
• Solar Charging: Connect a solar panel to the XT60 input port. Ensure the voltage is within the specified range (12-24V).
• Carport Charging: Use a 12V/24V car charger to connect to the DC input port.

3.4 Wireless Charging

Place your Qi-compatible device on the wireless charging pad on top of the unit.

3.5 App Operation

Download the ALLPOWERS app to monitor and control the power station remotely. The app allows you to check battery status, control outputs, and update firmware.

3.6 UPS Function

Connect the power station to a wall outlet and your devices to the power station's outputs. In case of a power outage, the R600 will automatically switch to battery power within 20ms.

4. FAQ

• How to judge if the product is charging? The battery indicator will flash.
• How to clean the product? Use a dry, soft cloth. Do not use liquids or solvents.
• How to store the product? Store in a cool, dry place. Recharge every 3-6 months to maintain battery health.
• Can this product charge and discharge simultaneously? Yes.
• What is the output capacity? The output capacity is limited by the battery capacity and the inverter's power rating.

5. Error Codes

• E1005: Overload Protection
• E201: Battery Low Voltage Protection
• E300: Over-temperature Protection
• E301: Over-voltage Protection
• E903: Fan Malfunction

If an error code appears, refer to the manual or contact customer support.

6. Package Contents

• 1 x ALLPOWERS R600 Portable Power Station
• 1 x AC Charging Cable
• 1 x User Manual
• 1 x Warranty Card

7. Disclaimer

ALLPOWERS Industrial International Limited is not liable for any damage or injury resulting from improper use, modification, or failure to follow instructions. Product specifications and features are subject to change without notice.

8. Contact Us

For support or inquiries, please contact ALLPOWERS Customer Support.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Radiation Exposure Statement:

• For wireless charger: This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. A distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected during operation.
• For Bluetooth: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Canada Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.

For wireless charger: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 10 cm surrounding the device and 10 cm above the top surface of the device must be respected.

For Bluetooth: This equipment complies with Canada radiation exposure limits set forth for uncontrolled environments. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.