ALLPOWERS R600 Portable Power Station

1. Safety Instructions

This product is a power station battery. Please follow basic precautions, including:

• Operate in a dry, well-ventilated place. Dry thoroughly if it gets wet before use.
• Close monitoring is required when used near children.
• Do not insert fingers into the product to avoid electric shock or other dangers.
• Do not touch AC interfaces with metal to prevent electric shock, fire, or other dangers.
• Do not block product vents during charging or use to prevent permanent damage.
• Do not expose the product to rain and snow.
• Do not use in environments with strong static electricity or strong magnetic fields.
• Use the specially designed cable. ALLPOWERS is not responsible for damage caused by third-party equipment.
• Do not disassemble the product. Seek a qualified repairer for service or maintenance.
• Improper use, falling, or excessive force may damage the product.
• When disposing of used batteries, separate batteries of different electrochemical systems.
• In case of fire, use a dry powder fire extinguisher or immerse in water.
• Keep the product away from fire and heat sources.

2. Specifications

General Information

• Battery type: LFP Lithium Iron Phosphate
• Protection type: High temperature, Low temperature, Over-discharge, Over-charge, Overload, Short circuit, Over current protection
• Net weight: Approximately 5.6KG (12.34lbs)
• Size: 285x195x190mm (11.2x7.6x7.5inch)
• Battery capacity: 299Wh (25.6V-11.68Ah)
• Bluetooth: Support
• UPS (uninterruptible power supply): Support
• Certification: CE FC RoHS IC

Input Ports

• AC Input: (100-120)V~4A Max, (220-240)V~2A Max
• Solar Input: (12-60)V~8.8A, 220W Max (XT60 connector)
• Car Charger Input: 12V/24V DC

Output Ports

• AC Output *2: 100-120V/220-240V 600W Max (Surged 1200W)
• USB-A Output *2: 5V 3A, 9V~2A, 12V~1.5A, 36W Max
• USB-C Output *2: 5/9/15V 3A, 20V 5A, 200W Max
• Car Port Output: 12V~10A, 120W Max
• Wireless Charger: 15W Max

Environmental Operating Temperature

• Charge Temperature: 0°C~40°C (32°F~104°F)
• Discharge Temperature: -10°C~40°C (14°F~104°F)
• Storage Temperature: -20°C~40°C (-4°F~104°F) (Recommended 20°C-30°C)
• Operating humidity range: 10-90%

3. User Guide

3.1 Product Appearance Introduction

Diagram showing the layout of ports and controls on the R600 power station.

• 1. Percentage of charge
• 2. Number of input Power
• 3. Number of output Power
• 4. Overload protector
• 5. Time remaining, fault code
• 6. Power saving mode icon
• 7. Fast charge mode icon
• 8. Mute mode icon
• 9. Output overload icon
• 10. DC indicates the icon
• 11. AC indicates the icon
• 12. AC output hertz number
• 13. Fan operating ID
• 14. Car charge output icon
• 15. Bluetooth connection icon

3.2 Introduction of Display (Touch) Icons

The LCD screen displays various information:

• Remaining time
• Display remaining battery capacity
• Display input power
• Display output power
• AC output frequency (50Hz/60Hz)

3.3 AC Charging

The AC input port supports ALLPOWERS fast charging technology. Charging power can be adjusted via Fast Mode/Standard Mode/Mute Mode.

• Fast Mode: Max input 400W
• Standard Mode: Max input 300W
• Mute Mode: Max input 200W (self-adjusting for quiet operation)

Use the original AC charging cable connected directly to a wall socket. Ensure household lines can handle the current. If not, switch to standard or mute mode.

3.4 Solar Charging

Connect solar panels in series. Ensure the solar panel output voltage is within 12-60V, max current is 12A, and max charging power is within 300W.

Diagram showing connection of solar panels to the XT60 input.

3.5 UPS Function (Uninterruptible Power Supply)

Connect the power grid to the AC input port. Electrical appliances can use the AC output port. When the power grid is suddenly cut off, the product switches to battery power within 10ms.

Note: It is recommended to use only one device at a time to avoid overload. The UPS function icon will light up before power off if entering UPS switching mode.

When connected to the power grid, turn on AC output first. The power grid directly supplies power to the device.

3.6 APP Operation Guide

3.6.1 APP Download

Scan the QR code to download and install the APP for iOS or Android.

3.6.2 Bluetooth Connection Power Station

1. Ensure Bluetooth is turned on for the power station and mobile phone.
2. Open the mobile APP and navigate to the Bluetooth connection interface.
3. Scan and search for the power station.
4. Select the corresponding power station (ALLPOWERS R600) and click to connect.
5. The display will show "ALLPOWERS R600 V2.0" upon successful connection.

3.6.3 Mobile APP Operation Instructions

• Charging power working mode setting: Set to Fast Mode, Standard Mode, or Mute Mode.
• Operation mode setting: Set to power saving mode. Configure AC or DC auto-off times (e.g., 1, 2, 4, 6 hours). AC or DC will turn off when total output is less than 10W.

4. FAQ

Q1. What type of battery does the product use?

This product uses high-quality lithium iron phosphate batteries (LFP).

Q2. What devices can R600 power?

The AC output port has a rated power of 600W (peak 1200W), capable of powering most household appliances. Confirm the appliance's power consumption is less than the rated power.

Q3. How to know how long the product can supply power?

The LCD screen displays the remaining battery life and estimated remaining time for devices with stable power consumption.

Q4. How to judge the product is charging?

The LCD screen displays the remaining charging time, and the battery indicator circle has a breathing animation effect.

Q5. How to clean the product?

Wipe with a dry, soft, clean cloth or paper towel.

Q6. How to store the product?

Turn off the product, store in a dry, ventilated place at room temperature. For long-term storage, discharge to 30% and recharge to 60% every three months.

Q7. Can this product be brought on the plane?

No.

Q8. Can the R600 be charged while using?

Yes, the product supports simultaneous charging and discharging.

Q9. Is the actual output capacity consistent with the target capacity?

The actual output capacity is lower than the rated capacity due to efficiency losses during charging and discharging.

Q10. How to turn on/off the Bluetooth?

Turn on the device, then press and hold the "USB OUTPUT" button for 3 seconds until the Bluetooth icon appears/disappears.

Q11. How to turn on/off the beep of the button?

Turn on the device, then press and hold the "USB OUTPUT + AC OUTPUT" button for 3 seconds until a prompt sound is heard.

5. Troubleshooting

The fault code is displayed on the screen. Refer to the table for fault types and recovery methods.

6. Package Contents

• ALLPOWERS R600
• AC Charging cable
• MC4 to XT60 charging cable
• User Manual and Warranty Card

7. Statement

Before using this product, read the user manual carefully. Incorrect use may cause serious injury or product damage.

ALLPOWERS is not responsible for losses caused by failure to use the product in accordance with the User Manual.

The company reserves the right to interpret this document and related product documents. Visit the ALLPOWERS official website for the latest product information.

This product is not intended for high-reliability applications like aerospace or medical equipment. ALLPOWERS is not responsible for any injury, fire, or malfunction if used in such equipment.

8. Contact Us

For questions or assistance, visit the official website: www.allpowers.com or email: support@allpowers.com