Yaheetech Accent Chair Assembly and Care
Important Information
Assembly Recommendations
- ??? We recommend 1 or more people to install.
- ⏰ The expected assembly time is 1 hour.
- ?? Not intended for use by children.
- ?? Keep away from fire or other heat sources.
- ✅✋ We recommend wearing protective gloves.
Assembly Environment
-
Incorrect Assembly: Diagram shows a character placing a box directly on the floor with a red cross (❌) indicating this is not recommended.
Correct Assembly: Diagram shows a character placing a box on a protective pad on the floor with a green checkmark (✅) indicating this is the recommended method to avoid damage.
Parts List
| Part Identifier | Description | Quantity |
|---|---|---|
| 1 | Back Panel | 1 |
| 2 | Seat Base | 1 |
| 3 | Back Support Frame | 1 |
| 4 | Front Leg Frame | 1 |
| A | Screw | 13 |
| B | Washer | 11 |
| C | Nut | 11 |
| D | Allen Key | 1 |
| E | Washer | 2 |
Assembly Steps
Step 1: Attach Seat Base to Back Panel
Connect Part 2 (Seat Base) to Part 1 (Back Panel) using screws (A), washers (B), and nuts (C). Half-tighten all screws initially. After all screws are set, fully tighten them.
Diagram Description: Shows Part 1 and Part 2 being joined with fasteners. Fasteners A, B, and C are visible.
Step 2: Attach Back Support Frame
Attach Part 3 (Back Support Frame) to the assembly from Step 1 using screws (A), washers (B), and nuts (C). Do not tighten screws completely at this step.
Diagram Description: Shows Part 3 being attached to the main frame assembly. Fasteners A, B, and C are used.
Step 3: Attach Additional Support
Attach Part A (Screw) with washer E to Part 1 and Part 3 at the indicated points.
Diagram Description: Shows a screw (A) and washer (E) being inserted into specific connection points between Part 1 and Part 3.
Step 4: Attach Front Leg Frame
Attach Part 4 (Front Leg Frame) to the assembly using screws (A), washers (B), and nuts (C). Do not tighten screws completely at this step.
Diagram Description: Shows Part 4 being attached to the base of the chair assembly. Fasteners A, B, and C are used.
Step 5: Final Tightening
Note: Tighten all screws completely after assembly. This involves securing the screws (A) with washers (E) to Part 1 and Part 4.
Diagram Description: Shows the chair frame with all previously installed fasteners being fully tightened.
Step 6: Flip Chair
Flip the assembled chair base.
Diagram Description: Shows the chair base being flipped over, indicated by a curved arrow.
Step 7: Adjust Feet
Screw in the adjustable feet to keep the chair balanced. Adjust them to the correct height to ensure stability. ?⬆️⬇️
Diagram Description: Close-up of an adjustable foot being screwed into the base of a chair leg. Arrows indicate adjustment for height and balance.
Maintenance and Care
Velvet Care
Vacuum your velvet piece monthly to keep it looking new. Use a nylon brush to remove any dirt or food. Contact a professional annually for a deep clean. ?
Stubborn Stains
Blot stains with a damp cloth and a dash of dish soap. Wipe away excess water with a clean towel. Let the material air-dry fully before use. ?
Additional Tips
Vacuum to remove any loose crumbs or dirt. If you have pets, use a lint roller to gather up any fur. ?
Preventative Care
Rotate pillows and cushions monthly to ensure even wear. Avoid placing your piece in direct sunlight to prevent fading. Consider adding a slipcover; most are machine-washable and can change up your style! ?️
Contact and Support
Customer Satisfaction
If you are not entirely satisfied with your purchase, please feel free to contact us using the following steps:
- Go to Your Orders.
- Find your order in the list.
- Select Problem with order.
- Choose your topic from list displayed.
- Select Contact seller.
The original document provides contact instructions in German, Spanish, French, and Italian as well.
Manufacturer and Importer
Manufactured in PRC for Yahee GmbH. Importer: Yahee GmbH, Höpfigheimer Straße 11.7, 4321 Bietigheim-Bissingen.
Download Manual
You can also download the electronic Installation Manual from the Product guides and documents section of the advertising page.
