MUNBYN L13 Label Printer User Manual

Content

• 1.0 Packing Introduction
• 2.0 Specification
• 3.0 Operation
• 4.0 Quick Connection
• 5.0 FAQ
• 6.0 Support

1.0 Packing Introduction

What's in the box?

The printer is designed with a penguin shape. It has a charging interface at the bottom. To open the cover, slide it down. To cut paper, pull it upward.

2.0 Specification

3.0 Operation

The printer features an indicator light that shows its status:

• Green Light: Fully charged/Normal use
• Red Light: Cover opened/Out of paper/Charging
• Red Flash: Low power
• Blue Light: Charging/Bluetooth connected

To operate, ensure the cover is closed and the printer is charged. The indicator light will show the current status.

4.0 Quick Connection

1. Open the cover and load the paper.
2. Scan the QR code below to download the App or search for "Munbyn Print" in Google Play or App Store.

For Android: [QR code for Android download]
For iPhone: [QR code for iPhone download]

After downloading the app, follow the on-screen instructions to connect via Bluetooth.

5.0 FAQ

Q1. Why do I need to open the geographic location and address book when using the App for android?

A1. This is a requirement by Google's rules. The App needs to abide by this rule on the Google platform. MUNBYN assures that user privacy is firmly protected.

Q2. Why cannot the printer connect to Bluetooth and print?

A2. First, search for "Munbyn Print" through Google Play or scan the QR code to download the App. Then, open the App to connect to Bluetooth.

Q3. Why does it print blank labels?

A3. Please make sure the printing side of the label is facing up.

Q4. Why does the App crash?

A4. Please uninstall and reinstall the latest App.

Q5. Why is the print not clear?

A5. Several factors can affect print clarity. First, ensure the battery is full. Second, adjust the font size, font type, and concentration. If these methods do not work, wipe the print head with an alcohol swab.

Q6. Why is printing response time sometimes long?

A6. This can be due to a slow Bluetooth transmission speed from the cell phone. Please be patient.

Q7. Why does it show out of paper when printing? (The label paper is loaded correctly)

A7. Please disconnect Bluetooth, restart Bluetooth to reconnect the App, or restart the App directly.

6.0 Support

MUNBYN provides an 18-month warranty and lifetime free service. If you encounter any issues with the product, please contact the MUNBYN team for troubleshooting tips or a replacement.

• Email: support@munbyn.com (24-7 online support)
• Website: www.munbyn.com (how-to videos)
• WhatsApp: +8617817881067
• Phone: +14034771911

You can also reach out via WhatsApp at +8617817881067 or find us on Facebook as Munbynofficial.

FCC Compliance Information

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.