MUNBYN Logistics Label Printer USER GUIDE
More Choice For Your Growing Business
Version: 2.0.7
Available Colors: White, Gray, Green, Pink
01 Product Introduction
1.1 What's in the package?
The package includes the following items:
- Printer
- USB Cable
- Adapter
- Power Cord
- Quick tips
- Labels
- User Manual
Diagram Description: An illustration showing the MUNBYN printer and its accessories, labeled A through G. A: Printer, B: USB Cable, C: Adapter, D: Power Cord, E: Quick tips, F: Labels, G: User Manual.
Note: If contents are missing or damaged, please contact MUNBYN support.
1.2 Printer Overview
Diagram Description: An illustration of the MUNBYN printer highlighting key components: Top cover button, Switch, USB connector, DC power connector, and the Feeder button and status light.
02 Set Up The Printer
Recommended: Watch the short setup video at: https://www.munbyn.biz/unboxing
2.1 Quick printer connection
Diagram Description: A step-by-step diagram illustrating the printer connection sequence. Follow these steps to connect the printer:
- Power off the printer.
- Connect the USB cable.
- Connect the power adapter.
- Connect the power cord.
- Power on the printer.
Please follow the sequence shown in the diagram to operate.
2.2 Label setup
Diagram Description: An illustration demonstrating how to load labels into the printer.
Automatic label identification:
- Load no less than 4 consecutive labels into the printer.
- After the paper is stable, press and hold the feeder button until you hear a beep.
- The printer will then automatically identify the labels.
03 Pro Tips
- Anytime you change your label type, run the automatic label identification.
- Press the feeder button on the printer to skip a blank label.
- To run a self-test, press and hold the feeder button until you hear two short beeps.
- Avoid using poor quality labels, as they can damage the printer.
- Regularly clean the printer head.
- If the paper is jammed and the red light flashes, run Automatic label identification.
- Insert the MUNBYN printer into the same USB port on your computer every time. This helps avoid creating duplicate copies of the printer in your operating system.
04 FAQ
For frequently asked questions, please visit: https://www.munbyn.biz/941faq
05 LED Status
| Light | Description | Troubleshoot |
|---|---|---|
| Green | Normal operation | / |
| Flashing Red (every 2 seconds) | Label paper is not identified | Run automatic label identification |
| Flashing Red (every 1 second) | Cover is not closed | Check that the cover is completely closed |
| Flashing Green and Red | Printer head is overheated | Printer will automatically resume once the printer head has cooled down |
06 Feeder Button Instruction
| Printer status | Feeder button | Function |
|---|---|---|
| Printing | Press the button | Pause printing |
| Standby | Press and hold on until you hear one beep | Automatic label identification |
| Standby | Press and hold on until you hear five beeps | Reset Printer |
07 Specification
| Method | Direct Thermal |
| Resolution | 203 dpi |
| Max Printing Speed | 150 mm/s |
| Paper Width | 40-110 mm (1.57-4.3 inches) |
| Paper Thickness | 0.06-0.25 mm |
| Power Adapter | 24V/2A |
| Printing Life | TPH 100Km |
| Operating Environment | Temperature: -10 to 50 °C, Humidity: 10-90% (non condensing) |
| Storage Environment | Temperature: -40 to 80 °C, Humidity: 5-95% (non condensing) |
| Connection | USB |
| Weight | 1.90 lbs/0.9kg |
| Dimensions | D198 mm * W 96mm * H 109 mm |
08 Safety Notices
- The printer head can become very hot after printing labels. Do not touch the printer head.
- Do not bend the power cord excessively or place objects on the cord.
- Do not use the printer if you find any irregularities as these could result in fire or electrocution.
- Keep the printer out of reach of children.
- Use only approved accessories and do not try to disassemble or repair the unit yourself.
- Keep the printer away from water and other objects that could penetrate the components.
- Please unplug the printer when it is not in use for long periods.
09 Tech Support
For assistance, please contact MUNBYN:
- E-mail: support@munbyn.com
- Whatsapp: +8617817881067 (QR code available for WhatsApp contact)
- Phone: +1 403 477 1911
- Skype: munbyn
- Support time: Monday to Friday, 24 hours.
MUNBYN provides 18 months warranty and lifetime free service.
If you encounter any issues with the product, please contact the MUNBYN team for troubleshooting tips or a replacement.
Website: www.munbyn.com (for how-to videos, warranty details)
(Note: QR codes are present on the original document for WhatsApp, Facebook message, and Munbyn official contact.)
FCC WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Use only the supplied antenna.
