IKEA BAGGEBO Cabinet with Door
Assembly Instructions
Important Safety Information
WARNING: Children have died from furniture tipover. To reduce the risk of furniture tipover:
- ALWAYS install anti-tip device provided.
- NEVER put a TV on this product.
- NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
- NEVER open more than one drawer at a time.
- Place heaviest items in the lowest drawers.
Read and follow each step of the instructions carefully.
Parts List
- 8x Screws (Part 100229)
- 16x Dowels/Pins (Part 101345)
- 1x Screw (Part 119976)
- 2x Screws (Part 109558)
- 1x Screw (Part 105493)
- 1x Screw (Part 109041)
- 1x Screw (Part 101068)
- 2x Allen Key (Part 100006)
- 1x Dowel/Pin (Part 133127)
- 1x Dowel/Pin (Part 139477)
- 2x Hinge part (Part 10119658)
- 2x Hinge part (Part 10119600)
- 4x Drawer runner (Part 105494)
- 1x Bracket (Part 103651)
- 1x Bracket (Part 122628)
- 1x Mounting bracket/part (Part 100823)
- 1x Screw (Part 101313)
- 1x Anti-tip kit bag (Part 319503)
- (Note: Additional screws like 101221 are used in assembly but not explicitly quantified on the parts list page.)
Assembly Steps
Step 1
Attach bracket (part 103651) to a panel using two screws (part 109558).
Step 2
Insert four dowels (part 101345) into the pre-drilled holes on the side panels.
Step 3
Connect the bottom panel to the side panels using the inserted dowels and screws (part 101345, 4x).
Step 4
Attach the second side panel to the structure using four dowels (part 101345).
Step 5
Secure the back panel to the cabinet frame using four screws (part 100229) and the Allen key (part 100006).
Step 6
Insert two dowels (part 101345) into the designated holes for the internal shelf supports.
Step 7
Attach the internal shelves to the cabinet structure using six dowels (part 101345).
Step 8
Fasten the top panel to the cabinet using four screws (part 100229).
Step 9
Attach the four drawer runners (part 105494) to the inside of the cabinet side panels using fourteen screws (part 101221). Ensure they are oriented correctly as shown in the diagram. Safety Reminder: Never allow children to stand, climb, or hang on drawers; open only one drawer at a time.
Step 10
Attach the four brackets (part 122628) to the cabinet structure.
Step 11
Secure one mounting bracket (part 109041) to the top of the cabinet using one screw (part 100823) and one washer (part 101313).
Step 12
Secure the second mounting bracket (part 100823) to the top of the cabinet using one screw (part 109041) and one washer (part 101313). This is part of the anti-tip hardware installation.
Step 13
Attach the hinge parts (parts 10119658 and 10119600, 2x each) to the cabinet doors.
Step 14
Attach one door handle (part 101068) to a door using one screw (part 101313).
Step 15
Attach the doors to the cabinet. Insert door pins (part 139477, 1x) and (part 133127, 1x) to connect the doors to the cabinet frame.
Step 16
Attach the door hinges to the cabinet frame using the provided screws.
Step 17
Connect the doors to the cabinet by aligning the hinges and pushing them into place until they click. Note: Ensure correct alignment for a secure fit.
Step 18
Attach the second door handle (part 10062514) to the other door using one screw (part 119976).
Final Check
The cabinet is now assembled. The doors can be adjusted as needed using the hinge mechanisms. Ensure the anti-tip hardware is securely fastened to the wall as per separate instructions for safety.
