BESTÅ
[IKEA logo] Design and Quality IKEA of Sweden
⚠️ WARNING
Children have died from furniture tipover. To reduce the risk of furniture tipover:
- ALWAYS install anti-tip device provided.
- NEVER put a TV on this product.
- NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
- NEVER open more than one drawer at a time.
- Place heaviest items in the lowest drawers.
Assembly Guidance
Read and follow each step of the instruction carefully.
Tools required: Phillips head screwdriver ?, Flathead screwdriver ?, Spirit level ?.
Important Notes:
- Do not assemble on a hard floor without protection (e.g., carpet or the packaging material) to avoid scratching. [No scratching symbol]
- Ensure correct orientation of parts. [Correct orientation symbol]
- If unsure about a step, consult the instructions or contact IKEA. [Question mark symbol]
- The anti-tip device must be installed to prevent tip-over. [Warning triangle symbol]
Parts List
| Part | Description | Quantity | Part Number(s) |
|---|---|---|---|
| [Image of screw with plastic anchor] | Screw with plastic anchor | 8x | 130618 |
| [Image of screw] | Screw | 3x | 114667 |
| [Image of cam lock] | Cam lock | 8x | 122971, 130725, 118137, 119253, 141028 |
| [Image of circular plate] | Circular plate | 2x | 126916 |
| [Image of square cap] | Square cap | 2x | 133194, 133195, 133196, 133303, 133304, 126918 |
| [Image of adjustable foot] | Adjustable foot | 4x | 114947, 115988 |
| [Image of Allen key] | Allen key | 1x | 100006 |
| [Image of bracket] | Bracket | 4x | 114929 |
| [Image of screw] | Screw | 4x | 116637 |
| [Image of hinge part] | Hinge part | 2x | 141413 |
| [Image of knob] | Knob | 2x | 141414 |
| [Image of hinge arm] | Hinge arm | 4x | 113301 |
Step 1
Place two base panels on a protected surface. Screw 4 adjustable feet (114947, 115988) into the pre-drilled holes on the underside of each panel. Ensure they are screwed in fully.
Diagram shows two panels on a rug, with close-ups of screwing in the adjustable feet.
Step 2
Take the two assembled base panels. Attach the side panels to the base panels using 8 screws with plastic anchors (130618). Insert the anchors into the holes on the base panels and screw them in using a screwdriver. Ensure the side panels are correctly oriented.
Diagram shows side panels being attached to base panels with screws and anchors. A close-up shows screwing in the anchor. A crossed-out image indicates not to use a power drill for this specific screw type (?❌).
Step 3
Lay the partially assembled frame on its front. Slide the back panels into the grooves on the side panels. Ensure they are fully seated.
Diagram shows the frame lying down and back panels being inserted into grooves.
Step 4
Insert 4 cam locks (122971, 130725, 118137, 119253, 141028) into the designated holes on the side panels. Turn the cam locks clockwise with a screwdriver to secure the back panels.
Diagram shows inserting cam locks and turning them to secure the structure. A close-up shows the cam lock mechanism.
Step 5
Slide the internal shelf or divider into the frame. Ensure it aligns with the pre-drilled holes and grooves.
Diagram shows a shelf being slid into the frame.
Step 6
Secure the internal shelf/divider using the appropriate hardware. Insert and turn cam locks if applicable.
Diagram shows securing the shelf/divider, with a close-up of the mechanism.
Step 7
Insert 4 cam locks (122971, 130725, 118137, 119253, 141028) into the designated holes on the side panels and turn them clockwise to secure the internal shelf/divider.
Diagram shows inserting cam locks and turning them.
Step 8
Carefully place the top panel onto the assembled frame. Align the holes.
Diagram shows the frame being rotated and the top panel being placed on top.
Step 9
Secure the top panel using the provided hardware. Use the Allen key (100006) to adjust the feet if needed.
Diagram shows securing the top panel and adjusting the feet with the Allen key.
Step 10
Attach the hinge mounting plates (126916) to the inside of the frame using screws. Ensure correct orientation. The diagram shows two types of plates, one with a crossed-out symbol, indicating the correct one to use.
Diagram shows attaching hinge plates to the frame. A close-up shows the plate and screw, and a "CLICK!" indicator for proper attachment.
Step 11
Attach the door knobs or handles (141414) to the doors using the provided screws. Turn the knobs to secure them.
Diagram shows attaching knobs to doors. A close-up shows turning the knob. A crossed-out image indicates not to overtighten (❌).
Step 12
Attach the doors to the frame by connecting the hinges to the mounting plates. Ensure they click into place.
Diagram shows attaching doors to the frame, with close-ups of the hinge mechanism connecting to the plate.
Step 13
Attach the second set of hinge mounting plates (126916) to the frame. Secure them with screws. The diagram shows the "CLICK!" mechanism for proper attachment.
Diagram shows attaching hinge plates to the frame, similar to Step 10.
Step 14
Attach the hinge arms (116637) to the doors using screws (114929). Ensure correct alignment.
Diagram shows attaching hinge arms to doors. A close-up shows the screws and alignment.
Step 15
Attach the other set of hinge arms (113301) to the doors. Ensure correct alignment and secure them.
Diagram shows attaching another set of hinge arms to the doors.
Step 16
Attach the doors with hinges to the frame by connecting the hinge arms to the mounting plates. Secure the doors using screws (114667).
Diagram shows connecting the doors to the frame and securing them with screws. The diagram indicates 3 screws per side.
