Latitude Run GGEX1634 King Size Upholstered Bed Frame Assembly Instructions

1. Components

Identify all parts before assembly. The following components are included:

Label	Description	Quantity
1	1/4"*3/4" Bolt	38
2	1/4"*1 9/16" Bolt	16
3	1/4" Washer	16
4	1/4" Spring Washer	8
5	4mm Allen Key	1
6	4mm Ratchet Wrench	1

Also included are the following bed frame parts, identified by letters:

A: Headboard
C: Side Rail
D: Footboard
E: Support Beam
G: Center Support Leg
H: Crossbar
I: Support Bracket
J: Support Bracket
K: Crossbar
L: Support Leg
M: Support Rail
N: Wall Anchor Strap (example)
R: Support Bracket
S: Support Bracket
T: Support Bracket
Z: Connector Piece

A diagram shows the general layout of these components.

Assembly Steps

Step 2: Attach Side Rails to Headboard/Footboard

Connect part E (Support Beam) to part Z (Connector Piece) using Bolt 1 [bolt]. Repeat for the other side. A diagram shows two E parts being attached to two Z parts. A note indicates to leave half of the thread of Bolt 1 exposed and not to completely tighten it. This step requires 6x Bolt 1.

Step 3: Assemble Frame Base

Attach part M (Support Rail) to parts L (Support Leg) and T (Support Bracket) using Bolt 1 [bolt]. Attach part I (Support Bracket) to part M. A diagram shows the assembly of these parts. This step requires 14x Bolt 1. A visual indicator shows 75% tightening for some fasteners.

Step 4: Attach Side Rails to Headboard/Footboard

Attach part R (Support Bracket) and S (Support Bracket) to the headboard (A) and footboard (D) using Bolt 1 [bolt]. A diagram shows these brackets being attached to the frame ends. This step requires 8x Bolt 1.

Step 5: Connect Side Rails to Headboard/Footboard

Attach part C (Side Rail) to the headboard (A) and footboard (D) using Bolt 1 [bolt]. A diagram shows the side rails being connected to the frame ends. This step requires 8x Bolt 1.

Step 6: Attach Center Support Legs

Attach part G (Center Support Leg) to part C (Side Rail) using Bolt 1 [bolt]. A diagram shows the center support legs being attached to the side rails. This step requires 8x Bolt 1.

Step 7: Install Support Beams

Attach part E (Support Beam) to part C (Side Rail) using Bolt 1 [bolt]. A diagram shows the support beams being installed. This step requires 6x Bolt 1. A visual indicator shows 100% tightening.

Step 8: Install Crossbar H

Install Crossbar H [crossbar H] between the side rails (C) and attach to support brackets (R, S) using Bolt 1 [bolt]. A diagram shows Crossbar H being installed. The text notes that Crossbar H may be installed in one of 3 locations to avoid interference with adjustable bed frames. This step requires 4x Bolt 1. A visual indicator shows 100% tightening.

Step 9: Install Crossbar K

Install Crossbar K [crossbar K] between the side rails (C) and attach to support brackets (M) using Bolt 1 [bolt]. A diagram shows Crossbar K being installed. The text notes that Crossbar K may be installed in one of 3 locations to avoid interference with adjustable bed frames. This step requires 8x Bolt 1. A visual indicator shows 100% tightening.

Step 10: Final Assembly and Warnings

Attach the headboard (A) to the assembled frame. A diagram shows an arrow pointing towards the headboard being attached. A safety warning section follows:

WARNINGS:

For safety reasons and to prevent injuries:

This bed is not intended for use by children under 4 years old.
Prohibit jumping and horseplay on this bed.
Do not use risers under this bed.

A diagram shows a crossed-out icon representing a warning symbol [warning symbol].

	Latitude Run Multifunctional Queen Bed Assembly Instructions Comprehensive assembly guide for the Latitude Run Multifunctional Queen Size Upholstered Bed, featuring reading lights, storage headboard, drawers, and trundle. Includes part lists, hardware details, and step-by-step instructions.
	Assembly Instructions: Latitude Run Upholstered Platform Bed Step-by-step guide for assembling the Latitude Run Padded Backrest King Size Upholstered Platform Bed, including parts list and hardware details.
	Latitude Run JMBB2586 Platform Bed Installation Guide Comprehensive installation manual for the Latitude Run JMBB2586 Queen Size Platform Bed, including assembly steps, safety warnings, warranty, and returns information.
	Latitude Run Queen Size Bed Frame Assembly Instructions Comprehensive assembly instructions and helpful tips for setting up your Latitude Run Queen Size Bed Frame. This guide covers unpacking, expansion, and final assembly steps.
	Latitude Run King Solid Wood Platform Bed Assembly and Care Manual Comprehensive guide for assembling and caring for your Latitude Run King Solid Wood Platform Bed (Model aaai1070). Includes step-by-step instructions, hardware list, and warranty information.
	Latitude Run Queen Bed Assembly Instructions Comprehensive assembly instructions for the Latitude Run Queen Bed, including parts identification, hardware details, and step-by-step guidance for a smooth setup.
	Assembly Instructions for Latitude Run CMB018KPL-MT Bed Frame Detailed assembly instructions for the Latitude Run CMB018KPL-MT bed frame. Includes a comprehensive parts list, hardware guide, and step-by-step visual descriptions to ensure proper assembly of your new furniture.
	Latitude Run Queen Platform Bed Frame Assembly Instructions Comprehensive assembly guide and important information for the Latitude Run Queen size platform bed frame (Model CMAS1134), including parts list, hardware details, step-by-step instructions, and care recommendations.