Tzumi Metro TWS Bluetooth Earbuds

Pairing Both Earbuds

1. Keep the distance between the cell phone and Metro within 3 feet (for pairing only).
2. Press and hold the multifunction button on both earbuds until you hear the prompt "Power On". You will then hear the prompt "Pairing". You will hear 2 chimes to indicate both earbuds are ready to pair.
3. Activate the Bluetooth function of the pairing device and select "Tzumi-Metro TWS" from the device list displayed.
4. You will hear "Device Connected". Your earbuds are now paired successfully.

Single Earbud Pairing

1. Press and hold the multi-function button for a few seconds until you hear 2 chimes. This means the earbuds go to pairing mode. Then, activate the device Bluetooth function to select "Tzumi-Metro TWS" from the list. Once you hear "Device Connected", it means the earbud is ready to use.

Connecting to Other Bluetooth Devices

Note: Your Metro can only be connected to one Bluetooth device at a time.

Notes on Master Earbud and Resetting

1. Factory default setting is RIGHT Earbud as MASTER Earbud. Once the end user wants to reset/change the MASTER Earbud, hold the multi-function button on BOTH earbuds for 6 seconds. When the lights begin to flash blue and red, meanwhile you hear 2 chimes, quickly press the multi-function button 2x on the earbud you want to be the primary one.
2. If your Metro earbuds aren't pairing to each other, they will need to be reset according to the above guide.

Listening to Music

• Power ON/OFF: Press and hold multi-function button.
• Play music: Press multi-function button.
• Pause/resume music: Short press master multi-function button.
• Next Track: Short press the follower earbud's multi-function button.

Making and Receiving Calls (MASTER Earbud Only)

• Answer/end call: Press multi-function button.
• Reject call: Press and hold multi-function button.
• Redial last call: Press twice quickly on the multi-function button.

Charging the Earbuds

Put both earbuds into the charging case.

Specifications