LC-POWER LC-M32S4K Mobile Smart Display User Manual

Introduction

Thank you for choosing the LC-POWER LC-M32S4K mobile smart display. Please read this manual carefully before using the product.

For technical support, please contact support@lc-power.com. For after-sales service, please contact your retailer.

Safety Precautions

• Keep the display away from water sources or damp places (e.g., bathrooms, kitchens, basements, swimming pools). Do not use the device outdoors if it might rain.
• Ensure the display is placed on a flat surface. If the display falls, it may cause injury or damage.
• Store and use the display in a cool, dry, and well-ventilated place, away from heat sources and strong electromagnetic interference.
• Do not cover or block the vent holes in the rear casing. Do not use the product on a bed, sofa, blanket, or similar soft surfaces.
• The supply voltage range is printed on the label on the rear casing. Consult your retailer or local power company if you cannot determine the supply voltage.
• If the display will not be used for a long period, turn off the power supply to avoid damage from voltage fluctuations.
• Use a reliable grounded socket. Do not overload the socket, as this may cause fire or electric shock.
• Do not insert foreign objects into the display, as this may cause short circuits, leading to fire or electric shock.
• Do not disassemble or repair the product yourself to avoid electric shock. Contact customer service for faults.
• Do not pull or twist the power cable forcefully.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Product Introduction

Packing List

Please check that the package contains all parts. If any part is lost, please contact your retailer.

• Smart display
• Pillar
• Base
• 5x screws (1 pc. as spare part)
• Camera
• Screwdriver
• Power adapter
• Power cable
• HDMI cable
• USB-C cable
• User manual
• Remote control

Installation

Installation of the stand (base and pillar)

1. Open the package, take out the stand stem. Connect the two stand stem parts in the specified order, secure them with two stand screws, and align the stand cover with the card slot to fasten it.
2. Remove Styrofoam blocks B and C sequentially and position the base as shown.
3. Fasten the stand stem and base with 4 screws.
4. Hold the stand upright. Assemble the display and stand. Use the display's "cavity slot" and the stand's "bracket hook" for easier handling. Position the power socket on the left side. Then, place the display onto the stand bracket until a click sound is heard.
5. Insert the power socket into the power slot. Remove the protective material from the VESA cover and assemble the VESA cover onto the display. (Note: The arrow on the VESA cover should face upwards when the display is in a horizontal position.)

Camera Installation

The camera can be attached magnetically to the top or left side of the display.

Adjustment

Tilting Angle: ± 18° (± 2°)

Height Adjustment: 200 mm (± 8 mm)

Vertical Angle: ± 90°

Instructions

Description of Buttons

• 1: Volume down
• 2: Volume up
• 3: Power on/off

Indicator Description

• No light: 1. Device is turned off and not charging. 2. Power off/charge, Power on/charge, Power on/no charge (Battery power > 95%).
• Blue: Power off/charging, Power on/charging, Power on/without charging (10% < Power ≤ 95%).
• Red: Power off/charging, Power on/charging, Power on/without charging (Battery ≤ 10%).

Cable Connections

Connect the power adapter to the DC IN port on the display. Connect HDMI or USB-C cables to the display and your devices (e.g., smartphone, tablet, notebook, PC).

Specifications

Update

To check for system updates, open Android settings, navigate to the last column, and select "Update".