LC-POWER LC-M32S4K User Manual for the mobile Smart Display

Safety Precautions

• Keep the display away from water sources or damp places, such as bathrooms, kitchens, basements, and swimming pools. Do not use the device outdoors if it could rain.
• Make sure the display is placed on a flat surface. If the display falls down, it may cause injury or the device may be damaged.
• Store and use the display in a cool, dry, and well-ventilated place, and keep it away from heat sources and strong electromagnetic interferences.
• Do not cover or block the vent hole in the rear casing, and do not use the product on a bed, sofa, blanket, or similar objects.
• The range of the supply voltage of the display is printed on the label on the rear casing. If it is impossible to determine the supply voltage, please consult the distributor or local power company.
• If the display will not be used for a long period, please turn off the power supply to avoid issues due to abnormal supply voltage.
• Please use a reliable grounded socket. Do not overload the socket, or it may cause fire or electric shock.
• Do not put foreign matters into the display, or it may cause short circuits resulting in fire or electric shock.
• Do not disassemble or repair this product by yourself to avoid electric shock. If faults occur, please contact the after-sales service directly.
• Do not pull or twist the power cable by force.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Product Introduction

Packing list

Please check that the package contains all parts. If any part is lost, please contact your retailer.

• Smart display
• Pillar
• Base
• 5x screws (1 pc. as spare part)
• Camera
• Screwdriver
• Power adapter
• Power cable
• HDMI cable
• USB-C cable
• User manual

Installation

Installation of the stand (base and pillar)

1. Open the package to take out the styrofoam parts and put them on a flat tabletop. Take out the parts in sequence as shown in the figure below.
2. Place the stand base into the cavity of the upper styrofoam part and use the styrofoam block A to assemble the stand pillar as shown below. The pillar notch should face down, and the DC in port should be accessible.

Note: The weight of the chassis is higher than 10 kg, please be careful during assembly.

3. Use the 4 pcs. of M4 screws to assemble the base and pillar.
4. Hold up the stand, then assemble the display and the stand. Use the display's "cavity slot" and the stand's "bracket hook" to hold up the display easily. Put the power socket at the "left side" position, then align the display close to the stand bracket until you hear a click sound.

Note: Please make sure to have the power socket on the "left side" position before connecting the display and bracket.

5. Insert the power socket into the power slot, and assemble the VESA mounting cover to the display.

Note: The arrow on the VESA mounting cover faces upwards after the display is in a horizontal position.

Camera Installation

The camera can be attached magnetically to the upper or left side of the display.

Adjustment

• Tilting angle: ± 18° (± 2°)
• Height adjustment: 200 mm (± 8 mm)
• Vertical angle: ± 90°
• Rotation angle: ± 30° (± 2°)

Instructions

Description of buttons

Indicator description

Note: There is no indicator light during the charging state between 10% and 98%.

Cable connections

Connect the power adapter to the display's DC in port and a power outlet. Connect the HDMI or USB-C cable to the display and your device (e.g., mobile phone, tablet, notebook, PC).

Specifications

Update

Open the Android settings and choose the last column; choose "Update" to check if your operating system is up to date.