Proaim Alpha Mobile Workstation: Stand, Laptop & Accessory Tray VESA Monitor Mount (TP-ALPA-02)

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed below.

• Alpha Docking Universal Support Stand with 5/8" Baby Pin Mount
• VESA Monitor Mount
• Proaim Alpha 3 x Wheels with Brakes
• 1 x Hook

Note: All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher.

Components Overview

Proaim Alpha Workstation Tray: A black, padded tray designed to hold a laptop or other equipment.

Proaim Alpha Tool Tray: A black, angled tray with compartments, designed to hold tools and accessories.

• 1 x Workstation Tray Holder
• 4 x Knobs
• 4 x Washers
• 2 x Springs

Alpha Stand Setup

1. Loosen the knob [knob] of the Alpha stand and spread its legs on the floor (as per your requirement). (Visual: Hands loosening a knob on the stand's central column and spreading the legs.)
2. Secure the legs with the help of knobs [knob] at the top and bottom. (Visual: Close-up of hands tightening knobs on the stand's legs.)

Alpha Stand Height Adjustment

1. Loosen the knob [knob] to adjust the stand height as per your need and tighten the knob [knob] back, as shown in the image. (Visual: Hand adjusting a knob on the stand's central pole to change height.)

Note: The Alpha Stand has 3 sections to adjust the height with quick & secure locking knobs. The central main post of the stand is adjustable, through which you can change its height as you require.

Alpha Wheels Setup

1. Using an Allen key [⚙️], loosen the bolts [bolt] of the Alpha wheels. (Visual: Allen key inserted into a bolt on a wheel assembly.)
2. Properly insert the alpha wheels into the Alpha support stand. (Visual: Wheel assembly being inserted into the stand's leg.)
3. After inserting the Alpha wheels, properly secure them with the help of an Allen key [⚙️] and push the locking lever to stabilize the wheel. (Visual: Allen key tightening a bolt on the wheel assembly, and a lever being pushed to lock it.)

Note: It is a set of three pneumatic wheels that revolve 360°, offering great mobility.

Note: Each wheel is secured to the standing leg with a locking lever and has a specially designed footbrake that keeps the stand completely steady, stable, and secure for reliable parking.

Note: Roll your stands smoothly around a set or location with Proaim Wheel Set, which combines perfectly with Proaim Alpha Support Stand and any 1x1" Square Legs Stands.

Alpha Workstation Tray Setup

1. Loosen the clamp knob [knob] of the workstation tray holder and then mount it onto the alpha support stand. (Visual: Hand loosening a clamp knob on the tray holder, then attaching it to the stand.)
2. After mounting the workstation tray holder, tighten the clamp knob [knob]. (Visual: Hand tightening the clamp knob.)

Note: It's tool-less mounting clamps make it super quick to connect, adjust & disconnect from a stand without hassle.

Note: Proaim Alpha Workstation/Case Tray transforms your C-Stand into the best standing & moving laptop workstation that you can take where your work requires it to be.

Alpha Tool Tray Setup

1. Mount the Alpha tool tray by sliding it onto the leg of the Alpha support stand and securing it properly by tightening the knob [knob]. (Visual: Tool tray being slid onto a stand leg, and knobs being tightened at the back.)

Note: In order to mount, you just need to slide and attach it over the leg-straps of the Alpha stand & tighten with four knobs at the back.

Note: Proaim Alpha Tool Tray lets you keep your all essential & frequently used production tools near & organized.

Note: It's all set to hold your block batteries, small-sized RAID systems, Allen keys & other essential tools.

VESA Monitor Mount Setup

1. Mount the monitor mount on the stand and secure it completely. (Visual: Monitor mount being attached to the stand.)
2. Loosen the side knob [knob] of the stand mounting clamp as per your requirement. (Visual: Hand loosening a knob, showing the monitor mount tilting.)
3. By loosening the side knob [knob], you can move the monitor mount up to 180° up-down, as shown in the images.
4. Loosen and remove the knob [knob] from the other side of the stand mounting clamp, and loosen the inbuilt bolt [bolt] using an Allen key [⚙️]. (Visual: Hand removing a knob, Allen key loosening a bolt.)
5. After loosening the inbuilt bolt [bolt], you can rotate the monitor mount up to 360°, as shown in the images. (Visual: Monitor mount being rotated.)
6. After the rotation, tighten the bolt [bolt] and re-attach the knob [knob]. (Visual: Hand tightening a bolt and re-attaching a knob.)
7. Remove the monitor mount from the stand mounting clamp and attach it to the LCD. (Visual: Monitor mount being detached from the stand and attached to an LCD screen.)
8. Bolt together the LCD and the monitor mount, and then attach it to the stand mounting clamp. (Visual: Screws being used to attach the LCD to the mount, then the assembly attached to the stand.)
9. Once the monitor mount is attached to the stand mounting clamp, secure it properly using an Allen key [⚙️] as shown in the image. (Visual: Allen key tightening a screw on the mounted assembly.)

Note: Monitor Mount provides an additional 3/8"-16 thread on the top for accessory mounting, e.g., Compatible LCD arms, mounts, etc.

Alpha Stand Adjustable Leg Setup

Note: When heavy weight is placed on the Alpha Stand, it may bend slightly (about 2°). To counter this, the stand comes with an adjustable leg.

1. Loosen the knob [knob] of the Alpha Stand to begin the adjustment process. (Visual: Hand loosening a knob on the stand leg.)
2. Pull the stand upwards gently to extend the adjustable leg. (Visual: Hand pulling a stand leg upwards.)
3. Once extended, tighten the knob [knob] to secure the position. (Visual: Hand tightening a knob on the extended leg.)

The adjustable leg is now fully extended, and the stand will realign to a straight position, as shown in the image. (Visual: Diagram showing the stand with an extended leg and a straight alignment, indicating a '2° Negative Angle' adjustment capability.)

Your Setup Is Ready

The Proaim Alpha Mobile Workstation is now fully assembled and ready for use.

Note: The Alpha Camera Stand also supports photo equipment & lighting accessories like reflectors, soft boxes, lights, utility trays, workstations, and many more.

Note: The Stand has a 5/8" baby pin mount on the top to attach the camera stabilizer system & gimbals with their support accessories.

(Visual: A fully assembled Proaim Alpha Mobile Workstation with a monitor, laptop tray, and accessory tray, shown with optional accessories.)

Warranty and Liability

Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn't cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us.

Liability: We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.

Contact Us: In case of any kind of dissatisfaction, please Contact us immediately and we promise our utmost support and care until you use our product.