PROAIM Alpha Docking Universal Support Stand with 5/8" Baby Pin Mount (TP-ALPA-01)
Assembly Manual
What's In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
The image displays the PROAIM Alpha Docking Universal Support Stand collapsed for transport. It shows the central column, legs, and mounting hardware.Alpha Stand Setup
- Loosen the knob of the Alpha stand and spread its legs on the floor (as per your requirement).Visuals show hands loosening a knob and spreading the legs of the stand outwards on a flat surface.
- Secure the legs with the help of knobs at the top and bottom.Close-up views demonstrate securing the stand's legs using knobs located at both the top and bottom sections of the leg joints.
- Loosen the knob to adjust the stand height as per your need and tighten the knob back, as shown in the image.Hands are shown loosening a central knob, extending the stand's telescopic sections upwards to increase height, and then re-tightening the knob to secure the position.
NOTE: The Alpha Stand has 3 sections to adjust the height with quick & secure locking knobs. The central main post of the stand is adjustable, through which you can change its height as you require.
- Mount the Lights on Alpha Stand and properly secure with the provided knob as shown in the picture.A hand is shown attaching a light fixture (e.g., a softbox) to the top of the stand and securing it with a knob.
NOTE: Alpha Camera Stand also supports photo equipment & lighting accessories like reflectors, softboxes, lights, utility trays, workstations, and many more. The Stand has 5/8" baby pin mount on the top to attach the camera stabilizer system & gimbals with their support accessories.
Alpha Stand Adjustable Leg Setup
NOTE: When heavy weight is placed on the Alpha Stand, it may bend slightly (about 2°). To counter this, the stand comes with an adjustable leg.
- Loosen the knob of the Alpha Stand to begin the adjustment process.A diagram illustrates the stand with a slight negative angle on one leg. Close-up images show hands loosening a knob on one of the legs.
- Pull the stand upwards gently to extend the adjustable leg.Hands are shown pulling one of the stand's legs upwards to extend it.
- Once extended, tighten the knob to secure the position.The knob on the extended adjustable leg is shown being tightened to lock it in place.
The adjustable leg is now fully extended, and the stand will realign to a straight position, as shown in the image.
The stand is depicted in a straight, stable position after the adjustable leg has been extended and secured.YOUR PROAIM ALPHA DOCKING UNIVERSAL SUPPORT STAND ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty Information
PROAIM offers a one-year warranty for its products from the date of purchase. Within this period, PROAIM will repair the product without charge for labor or parts. The warranty does not cover transportation costs or damage resulting from misuse or accidental damage. Warranty repairs are subject to inspection and evaluation by PROAIM.
Liability Statement
PROAIM is not liable for damage caused by products not supplied by PROAIM, or from mishandling during transit, accidents, misuse, neglect, lack of care, or service performed by anyone other than PROAIM's authorized personnel.
Customer Support
For any dissatisfaction, customers may contact PROAIM for support and care until they use the product.
All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher.
