Proaim Multi-Monitor VESA Mount System (P-MLMT-01) Assembly Manual

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed below.

• 2 x Cross Tubes
• 2 x Pole
• 2 x Vesa Mount
• 2 x T-Type Allen Key ⚙️
• 2 x Cross Bars
• 2 x Clamps
• Bag (containing fasteners, sizes: 3x16", 4mm)

Assembly of Clamps

Loosen and open the ratchet knob of the clamp. [Diagram: A clamp component showing a loosened ratchet knob.]

Align and attach the clamp with the rod and then tighten it using the ratchet knob. [Diagram: Clamp being attached to a rod and tightened.]

Similarly, attach the other clamp with the rod as shown in the image. [Diagram: Second clamp being attached to the same rod.]

Now, loosen the knob of the clamp and insert the pole by matching it with the clamp hole. [Diagram: Clamp knob loosened, pole being inserted into the clamp.]

After inserting the pole, tighten it with the help of the clamp knob. [Diagram: Pole secured in the clamp by tightening the knob.]

Similarly, follow the same procedure for attaching the another pole of the cart. [Diagram: Second pole being attached using the same clamp mechanism.]

Pole Height Adjustment and Cross Tube Insertion

Five positions are provided to adjust the height in the pole, allowing height adjustment according to your setup requirements. This feature enables adjustment for seated or standing monitor viewing angles. [Diagram: Pole showing multiple height adjustment positions.]

To insert the cross tubes, loosen all the knobs attached to the pole and then remove the rod end caps. [Diagram: Knobs on the pole loosened and end caps removed.]

Insert the cross tube by matching it with the hole of the pole. [Diagram: Cross tube being inserted into the pole.]

Similarly, insert the second cross tube. [Diagram: Second cross tube inserted into the pole.]

Cross Bar Attachment

Loosen both knobs of the cross bar. [Diagram: Cross bar with knobs loosened.]

Align the holes of the cross bar to the cross tubes, and then insert the cross bar by simply sliding. [Diagram: Cross bar aligned with cross tubes and sliding into place.]

After inserting the cross bar, securely re-tighten the knobs. Similarly, insert the second cross bar. [Diagram: Cross bar secured by tightening knobs, second cross bar insertion.]

Properly tighten and secure the bolt on the back side of the cross bar with the help of the Allen key. [Diagram: Allen key tightening a bolt on the cross bar.]

Equally insert both the cross tubes into the second pole. [Diagram: Cross tubes being inserted into the second pole.]

Properly tighten the knobs of the pole to secure the assembly. [Diagram: Knobs on the second pole tightened to secure the structure.]

Securing Cross Tubes and VESA Mount Assembly

Insert the rod end cap to secure the cross tube. [Diagram: End cap being placed on the cross tube.]

Secure it with the help of the provided knob of the pole. [Diagram: Knob securing the end cap and cross tube.]

Assembly of Vesa Mount

Loosen the knob of the Vesa Mount. [Diagram: Vesa mount with its knob loosened.]

Loosen and remove the bolt present on the side of the Vesa Mount. [Diagram: Bolt on the side of the Vesa Mount being removed.]

Mount the cross bar on the Vesa Mount. [Diagram: Cross bar being placed onto the Vesa Mount.]

Insert the bolt by matching the thread holes of the Cross Bar and Vesa Mount and secure the assembly with the Allen key. [Diagram: Bolt inserted through Vesa Mount and Cross Bar, tightened with Allen key.]

Re-tighten the knob of the Vesa Mount and properly secure it with the cross bar. [Diagram: Vesa mount knob tightened to secure the cross bar.]

Follow the same procedure to attach the second Vesa Mount. [Diagram: Second Vesa mount being attached.]

Remove the Vesa Mount by loosening the knob attached to it. [Diagram: Vesa mount knob loosened for removal.]

Place and attach the Vesa Mount by matching it with the thread hole at the back of the LCD monitor (Not Included). [Diagram: Vesa mount being attached to the back of an LCD monitor.]

Tighten the assembly with the help of the Allen key. [Diagram: Allen key tightening the Vesa mount to the monitor.]

Similarly, properly secure all the bolts by tightening them. [Diagram: All bolts securing the Vesa mount to the monitor tightened.]

Final Setup and Product Information

Insert the LCD monitor onto the Vesa Mount and properly align it. Insert bolts and properly tighten them with the help of the Allen key. [Diagram: Monitor being placed on the Vesa mount and secured with bolts.]

The Multi-Monitor Vesa Mount System setup is now ready to use.

Proaim Multi-Monitor VESA Mount System: All set and ready to go! (Configuration shown may include optional accessories.)

Warranty and Support

Warranty: Proaim offers a one-year warranty for its products from the date of purchase. Within this period, repairs for labor or parts will be provided free of charge. The warranty does not cover transportation costs or damage resulting from misuse or accidental damage. Warranty repairs are subject to inspection and evaluation by Proaim.

Liability: Proaim is not liable for damage caused by products not supplied by Proaim, mishandling during transit, accidents, misuse, neglect, lack of product care, or service performed by entities other than Proaim.

Support: In case of any dissatisfaction, please contact Proaim immediately. Proaim promises its utmost support and care to ensure customer satisfaction with its products.