PROAIM Low Ninja Baby 5/8" Double Riser Stand (TP-LNJB-01)

Assembly Manual

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed below.

Contents: Low Ninja Baby Stand

(Note: The document mentions inspecting contents but does not list them individually. A visual of the stand is provided.)

A photograph of the PROAIM Low Ninja Baby 5/8" Double Riser Stand, showcasing its compact tripod base, central telescopic columns, and overall metallic construction.

All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher.

Low Ninja Baby Stand Setup

Loosen the knob of the Low Ninja baby stand and spread the legs of the stand equally.
Note: The stand collapses easily to an extremely small size, making it ideal for both storing and traveling.
Image: Hands are shown loosening a large knob at the base of the stand, preparing to spread the legs.
After spreading the legs, properly tighten the knob of the stand.
Note: The Baby Stand is equipped with a leveling leg for balancing loads on an incline or uneven terrain. The feet have rounded plastic capping.
Image: Hands are shown tightening a knob at the base of the stand, securing the spread legs.
Loosen the top knob of the Low Ninja stand and increase the height of the stand.
Image: Hands are shown loosening a knob on the main central column of the stand, indicating the adjustment of its height.
After increasing the height, properly tighten the knob.
Image: Hands are shown tightening a knob on the main central column of the stand, locking the adjusted height.
To increase the extra height of the stand, loosen the bottom knob and increase the height.
Image: Hands are shown loosening a lower knob on the central column, which controls an additional extension for greater height.
Set the stand's height according to your requirement.
Note: The stand rises to a maximum height of 39.8" / 101.1 cm and can go as low as 22.2" / 56.5 cm with built-in solid locks to steady the stand's height.
Image: Hands are shown extending or adjusting the height of the stand by manipulating the central column.

Stand Features and Dimensions

Note: It is a 3-section, double-riser stand with a foot base, collapsible legs, and a middle-level spreader, which offers excellent steadiness for your lighting equipment indoors and outdoors.

A technical illustration displaying three configurations of the PROAIM Low Ninja Baby Stand. The first shows the stand at 101cm height with a Ø25mm top tube. The second shows it at 78cm height with a Ø30mm top tube. The third shows it at 56.5cm height with a Ø35mm top tube, illustrating its adjustable height and varying tube diameters.

Loosen the knob of the leveling leg to properly balance the stand and then again tighten the knob.

Note: The Baby Stand is equipped with a leveling leg for balancing loads on an incline or uneven terrain. The feet have rounded plastic capping.

Hands are shown loosening a knob on the leveling leg of the stand, which is designed to help balance the stand on uneven surfaces. An inset provides a closer view of the leveling leg mechanism.

Light Setup

Loosen the light knob and mount it onto the Low Ninja stand.
Image: Hands are shown loosening a knob on a lighting fixture.
After mounting the light, properly tighten the knob.
Image: Hands are shown preparing to attach a lighting fixture to the 5/8" baby pin located at the top of the PROAIM Low Ninja Baby Stand.

Note: The 5/8" baby pin on the top allows you to mount studio equipment like lights, reflectors, backgrounds, & even a Camera Stabilizer System & Gimbals with support accessories.

Product Overview and Support

Note: 1. The Low Ninja Baby Stand offers the ultimate solution for supporting heavy fixtures or any grip equipment low to the ground. 2. This Baby Ninja stand is perfectly balanced to mount heavy fixtures, boom, or studio lights at incredibly low angles, offering solid support in the studio and easy transportation to location shoots.

A PROAIM Low Ninja Baby Double Riser Stand is depicted in a fully assembled and operational state, supporting a lighting fixture. The image highlights its suitability for low-angle shots and its use with optional accessories, suggesting readiness for professional studio or location shoots.

Warranty Information

PROAIM offers a one-year warranty for its products from the date of purchase. Within this period, repairs will be made without charge for labor or parts. The warranty does not cover transportation costs or damage resulting from misuse or accidental damage. Warranty repairs are subject to inspection and evaluation.

Liability Statement

PROAIM is not liable for damage caused by products not supplied by the company, or from mishandling during transit, accidents, misuse, neglect, lack of care, or service performed by anyone other than PROAIM's authorized personnel.

Product Support

For any product support or inquiries, PROAIM is committed to providing utmost support and care.

	PROAIM Alpha Docking Universal Support Stand Assembly Manual \| TP-ALPA-01 Assembly guide for the PROAIM Alpha Docking Universal Support Stand with 5/8" Baby Pin Mount (TP-ALPA-01). Includes setup instructions, adjustable leg features, and warranty details.
	PROAIM FlexLift Folding Camera Stand (P-FXFS-01) - Setup and Guide Guide to the PROAIM FlexLift Folding Camera Stand (P-FXFS-01). Covers package contents, setup, camera/phone mounting, adjustments, folding, and warranty. Suitable for videographers and content creators.
	PROAIM STD-PTZ-01 3-Stage PTZ Camera Support Stand Assembly Manual Assembly manual for the PROAIM STD-PTZ-01 3-Stage PTZ Camera Support Stand with 5/8" Baby Pin & Ball Head. Includes setup instructions, component identification, warranty, and liability information.
	PROAIM Vanguard Collapsible Cart for C-stands (CT-VNGD-CS) Assembly Manual Assembly instructions and details for the PROAIM Vanguard Collapsible Cart, designed for holding C-stands. Includes parts list, setup guide, warranty information, and product overview.
	PROAIM 100mm Camera Tripod Stand with Aluminum Spreader (CST-100-01) - Setup Guide Learn how to set up your PROAIM 100mm Camera Tripod Stand (CST-100-01) with the included aluminum spreader. This guide covers unboxing, assembly, and important warranty information.
	PROAIM Heavy-Duty 150mm Tripod Stand with Spreader (P-CST-150-BLK) - What's In The Box This document outlines the contents of the PROAIM Heavy-Duty 150mm Tripod Stand with Spreader (P-CST-150-BLK) package. It provides a visual and textual confirmation of the items included.
	Proaim Vanguard Collapsible Cart CT-VNGD-CS Assembly Manual Step-by-step assembly guide and parts list for the Proaim Vanguard Collapsible Cart (CT-VNGD-CS), a durable solution for organizing and transporting C-stands and other film/video equipment.
	Proaim Alpha Mobile Workstation Assembly Manual (TP-ALPA-02) Comprehensive assembly manual for the Proaim Alpha Mobile Workstation, detailing the setup of the stand, laptop tray, accessory tray, and VESA monitor mount. Includes step-by-step instructions and component identification.