Porodo Soundtec Air Beat Open-Ear Wireless Earbuds

Safety Precautions

1. Do not attempt to disassemble the unit or replace any parts unless the manual provides specific instructions for such actions.
2. Keep the unit away from liquids, moisture, or humidity, as it is not a waterproof product.
3. If liquid enters the unit, disconnect it from your Bluetooth device and move it to a safe area.
4. Avoid assembling or disassembling the unit if your hands are wet, as this may lead to electric shock.
5. Do not expose the unit to extreme temperatures or dispose of it in fire, as this may cause an explosion.
6. Avoid placing the unit in environments with strong electromagnetic interference, as this may lead to malfunction.

Package Contents

The package includes:

• Earbuds
• Charging Case
• USB Type-C Cable

Schematic View

Earbuds:

• Multi Functional Touch Button
• Indicator Light

Charging Case:

• Type-C Charging Port

Specifications

Charging Case Description

The charging case has a battery capacity of 300mAh and requires approximately 2 hours for a full charge. The rated input for the case is 5V = 300mA. To charge the case, connect the Type-C cable to a 5V power adaptor and plug the other end into the charging port of the case. When the white indicator light on the charging compartment flashes, the case should be charged promptly to ensure optimal performance.

Indicator Status

Earphone Indicator Light

• Power On: The white light turns on for 1 second.
• Power Off: The red light turns on for 1 second.
• Pairing: The indicator flashes white and red alternately during pairing.
• Pairing Successful: The indicator turns off once the earphones are paired.
• Charging: The red light remains steadily on while charging.

Charging Case Indicator Lights

• Charging (Not Fully Charged): The digital display flashes to show the current power level while charging.
• Fully Charged: When charging is complete, the digital display shows "100".
• Discharging: The current power level is displayed digitally. A scroll bar shows the power status for both the left and right earphones.
• Low Battery: The battery display blinks on a single segment to indicate a low battery level.

Instructions for Use

1. Power On

• Method 1: Remove the earphones from the charging compartment; the headset will automatically turn on.
• Method 2: Press and hold the MF button on the headphones for 3 seconds to turn them on.

2. Power Off

• Method 1: Place the headphones back into the charging case and close the lid to turn them off.
• Method 2: When both the left and right earphones are turned on, they will turn off automatically after 5 minutes of storage or disconnection.

3. Pairing with the Bluetooth Device

Step 1: Remove the earbuds from the charging case. The left and right earbuds will automatically pair with each other.

Step 2: Open the Bluetooth settings on your device, search for "PD_STWS_05". Select the product to Connect (single ear use is supported).

4. Touch Button Operation

Music Playback

• Previous Song: Triple-tap the left earphone (L) touch button to skip to the previous song.
• Next Song: Triple-tap the right earphone (R) touch button to skip to the next song.
• Increase Volume: Tap the right earphone (R) touch button to increase the volume.
• Decrease Volume: Tap the left earphone (L) touch button to decrease the volume.
• Pause/Play: Double-tap any headset function button to pause or play music.

Phone Hands-Free Operation (During Incoming Call)

• Answer Call: Double-tap any headset touch button to answer an incoming call.
• Reject Call: Long-press any earphone touch button for 2 seconds to reject the incoming call.
• End Call: Double-tap any headset touch button to hang up the call.

Voice Assistant Operation

• Activate Voice Assistant: Long-press the touch button on either earphone for 2 seconds to activate the voice assistant.
• Switch to Music/Game Mode: Long-press the right earphone (R) touch button for 2 seconds to switch between music and game modes.

Restore Factory Settings

If the headset is not paired with the phone, press the headset function button five times to clear the pairing information and turn the device off.

Material Content Table

This form is compiled in accordance with SJ/T 11364.

○: Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirements specified in GB/T 26572.

◎: Indicates that the content of the hazardous substance in at least one of the homogeneous materials of the part exceeds the limit requirements specified in GB/T 26572.

Parts marked with "X" on the form are considered harmful due to the limitations of global technological development. Substitution of these substances is encouraged.

Environmental Protection Use Period

Electronic and electrical products sold in the People's Republic of China must display this logo. The number in the logo represents the product's environmental protection use period under normal usage conditions.

FCC Statement

According to Part 15 of the FCC Rules, this device has been tested to meet the restrictions for Class B digital devices. These restrictions are intended to provide reasonable protection against harmful interference in residential areas. The device generates and uses radiofrequency energy. If this instruction is not installed and used in accordance with the regulations, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this device is built for radio or television reception and causes harmful interference, the interference can be resolved by turning the device off and on. If interference persists, the user is encouraged to try one or more of the following measures:

• Redirect or reposition the receiving antenna.
• Increase the distance between the device and the receiver.
• Connect the device to sockets on circuits different from those used by the receiver.
• Consult a dealer or an experienced radio/TV technician for assistance.

This device complies with Part 15 of the FCC Rules. The operation is restricted by the following two conditions:

• The device shall not cause harmful interference.
• The device must accept any received interference, including interference that may cause unexpected operation.

Changes or modifications not explicitly approved by the responsible party for compliance may void the user's permission to operate the device.

Disposal

This product must not be disposed of as unsorted household waste. It is important to separate such waste for proper treatment and recycling, in compliance with local waste management regulations.

Warranty

Products purchased directly from the Porodo website or shop come with a 24-month warranty. Products purchased from approved sellers come with a 12-month warranty. To extend the warranty, visit porodo.net/warranty, fill out the form, and upload a picture of the product. An email will be sent to confirm the warranty extension.

For more information, please check: porodo.net/warranty

Contact Us

For any questions, please contact Porodo:

• Email: info@porodo.net
• Website: porodo.net
• Service Support: support@porodo.net
• Instagram: porodo