Porodo Soundtec GRAVIS True Wireless Earbuds
SKU: PDSTLM12
Brand: Porodo
Package Contents
The package includes:
- Earbuds
- Charging Case
- Type-C Charging Cable
Caution
- Do not attempt to disassemble or replace any parts of the earbuds.
- Avoid putting the earbuds in water or any other liquid, as they are not waterproof.
- If any liquid accidentally enters the product, immediately disconnect and remove the connection.
- Ensure your hands are dry when installing or uninstalling the product to prevent the risk of electric shock.
- Keep the product away from heat sources or direct exposure to fire.
- Do not place the product in environments with strong electromagnetic forces, as this may cause malfunctions.
Specifications
| Model | PDSTLM12 |
|---|---|
| Rated Input | 5 V / 300 mA |
| Battery Case Capacity | 300 mAh |
| Earbuds Capacity | 38 mAh |
| Charging Interface | Type-C |
| Bluetooth Version | V5.4 |
| Playtime | 5 H |
| Recharge Time | 2 H |
| Wireless Transmission Range | ≥ 10 M |
| Bluetooth Frequency | 2.4-2.48 GHZ |
Charging Guide
Connect the charging bay to a 5 V power adapter using the Type-C charging cable. If the voltage drops below 3.4 V, a low voltage warning will occur every 60 seconds, accompanied by a voice prompt: "Battery low."
Indicator Light Guide
| Status | Indicator Light |
|---|---|
| Power On | The white light flashes. |
| Power Off | Turn off the light. |
| Power-on Automatic Pairing | The main headset flashes white. |
| Pair Left and Right Earphones | The main headset flashes white. |
| Successful Connection | Turn off the light. |
| Disconnect | The main headset flashes white. |
| Earphone Charging | The white light stays on. |
Instruction for Use
- Power On: Remove the headset from the charging case to turn it on, or press and hold the touch button for 5 seconds to power it on manually.
- Power Off: Place the headset back into the charging case to turn it off, or press and hold the touch button for 5 seconds to manually power it off.
- Pairing and Connecting:
- Open the charging case and take out the earphones. The left and right earphones will automatically power on.
- If the headset was manually powered off, it will enter pairing mode once the Bluetooth on your mobile phone is turned off.
- When pairing, select "PD_STWS_12" from the Bluetooth list on your phone. Once the pairing is successful, the earphones will announce "TWS Connected" or "TWS Connected Successfully."
- Switch Language Prompt Tone: If the headset is in pairing mode but not connected to the mobile phone, press the touch button on either earphone four times to switch between English and Chinese voice prompts.
- Auto Power-Off: If the headset remains in pairing mode without connecting to a device, it will automatically power off after 3 minutes.
- Automatic Reconnection:
- Once the left and right earphones are powered on, they will automatically reconnect.
- After the headset is successfully paired with the mobile phone, it will automatically reconnect to the phone when turned on, as long as the phone's Bluetooth is enabled.
Touch Function Guide
Voice Assistant
Enable Siri: Press and hold the touch button on either earphone for 3 seconds. [voice assistant]
Music Playback
- Play/Pause: Tap the touch button on either earphone. [play/pause]
- Previous Song: Triple-tap the touch button on either earphone. [previous song]
- Next Song: Double-tap the touch button on either earphone. [next song]
Call Management
- Answer an Incoming Call: Tap the touch button on either earphone. [answer call]
- Hang Up: Tap the touch button on either earphone. [hang up]
- Reject a Call: Press and hold the touch button on either earphone. [reject call]
Material Content Table
| Part Name | Pb | Hg | Cd | Cr(VI) | PBB | PBDE |
|---|---|---|---|---|---|---|
| Circuit Board | $\bigcirc$ | $\bigcirc$ | $\bigcirc$ | $\bigcirc$ | $\bigcirc$ | $\bigcirc$ |
| Small Structures | $\bigcirc$ | $\bigcirc$ | $\bigcirc$ | $\bigcirc$ | $\bigcirc$ | $\bigcirc$ |
$\bigcirc$: Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit required by GB/T 26572.
X: Indicates that the hazardous substance in at least one homogeneous material of the part exceeds the limit requirements specified in GB/T 26572.
The parts marked with "X" in the form are considered harmful due to global technological limitations. These substances may be substituted as technology advances.
Printed Circuit Board Components: This includes printed circuit boards and their parts, electronic components, etc. Depending on the product model, the earbuds you purchased may not contain all of the components listed above.
Electronic and electrical products sold in the People's Republic of China must display this logo. The number in the logo represents the product's environmental protection use period under normal conditions.
Disposal
This product must not be disposed of as unsorted household waste. It is important to separate such waste for proper treatment and recycling, in compliance with local waste management regulations.
Warranty
Products purchased directly from the Porodo website or shop come with a 24-month warranty. Products purchased from approved sellers have a 12-month warranty. To extend the warranty, visit porodo.net/warranty, fill out the form, and upload a picture of the product. A confirmation email will be sent upon acceptance.
For more information, please check: porodo.net/warranty
Contact Us
For any questions regarding this Privacy Policy, please contact Porodo at:
- Email: info@porodo.net
- Website: porodo.net
- Service Support: support@porodo.net
- Instagram: porodo
Porodo | Choose the Best!
