Wearing Method
The earphones are designed for bone conduction, resting on the cheekbones in front of the ears. This leaves the ear canal open for awareness of surroundings. [Illustration of a person wearing bone conduction earphones]
Package Content
The package includes:
- Earphone: Bone conduction headset.
- Storage Bag: Drawstring storage bag [drawstring bag icon]
- Cable: USB charging cable [USB cable icon]
- Strap: Adjustable strap [strap icon]
- Earplugs: Silicone earplugs [earplugs icon]
Power On/Off
Power On: Press and hold the power button for 3 seconds. Blue LED illuminates for 1 second with an audio cue.
Power Off: Press and hold the power button for 3 seconds. Red LED illuminates for 1 second with an audio cue.
[Illustration of earphone buttons and LED indicator]
Pairing Guide
Press and hold the power button for 3 seconds (headset off). Device enters pairing mode (LED flashes red/blue, audio prompt). Activate Bluetooth on your device and search for 'PD-STWLEP031'. Successful connection shows blue LED for 3 seconds with audio prompt.
[Illustration showing earphone and a smartphone for pairing]
Call Management
[A] Automatic Shutdown: Headset auto-shuts down after 5 minutes of inactivity (unless connected to Bluetooth).
[B] Dial Cancellation: Press the switch button to end a call before the other party answers. [Illustration of earphone buttons]
[C] Answer a Call: Press the on/off button to answer an incoming call. Press and hold the on/off button for 1 second to switch between Bluetooth and regular phone calls after answering. [Illustration of earphone and smartphone with an incoming call interface]
[D] Rejecting a Call: Press and hold the switch button for one second to decline an incoming call. [Illustration of earphone and smartphone with call rejection interface]
[E] Ending a Call: Press the switch button when the conversation is over to disconnect. [Illustration of earphone and smartphone with call ending interface]
Voice Assistant
Press the power button four times quickly to activate the voice assistant (e.g., Siri). [Illustration of earphone buttons and smartphone displaying 'Siri']
Music Playback
- Pause/Resume: Press the power button once to pause. Press again to resume. [Illustration of earphone buttons and smartphone with music playback controls]
- Volume Control: Tap the '+' button to increase volume (6.7% per tap, 15 taps for max). Tap the '-' button to decrease volume. [Illustration of earphone buttons and smartphone with a volume slider]
Automatic Reconnection
A. Reconnection on Startup: Automatically reconnects to the last paired device on power on.
B. Reconnection via Mobile Device: Manually reconnect via your mobile device if disconnected.
C. Reconnection after exiting Bluetooth connection range: Automatically reconnects when back within Bluetooth range. Press switch button to initiate reconnection if it fails.
Switch to TF Card Mode
- Press power button twice quickly (while on) to switch to TF card mode ('SD card mode' prompt). Music plays from TF card automatically.
- Switching to TF card mode disconnects Bluetooth. Press power button twice quickly to switch back to Bluetooth mode ('Bluetooth mode' prompt). Bluetooth reconnects automatically if previously paired.
- In TF card mode, remembers last playback position.
Battery Level Voice Prompt
Press the power button three times to hear the current battery level announced.
Switch Playback Mode
In TF Card Mode: Default is sequential. Press power button four times for random playback. Press four times again to return to sequential or current song playback.
Pausing Playback
In TF Card Mode, if paused and no button is pressed for 45 minutes, the headset will power off.
Battery and Charging
- Below 10%, red light flashes every 5 seconds, 'Low Battery' audio alert every 10 minutes.
- Connect to USB port for charging. Red light stays on during charging. Blue light illuminates when fully charged. Light turns off when cable is disconnected. Charging time approx. 2 hours.
- Headset automatically powers off and resets when charging cable is connected.
- While headset is on, press power button three times to announce battery level.
[Illustration of earphone with LED indicator and USB charging port]
Reset
To reset to factory settings, press and hold the power button for 10 seconds while the headset is off. Device powers on automatically after reset.
Specifications
| Feature | Specification |
|---|---|
| Battery Capacity | 230mAh |
| Recharge Time | 2H |
| Playtime | 8H |
| Bluetooth | V5.3 |
| Transmission Distance | 10M |
| Driver | Φ18mm, Vibration Speaker |
| Memory | Built-in 32GB |
| Waterproof Level | IPX8 |
| Waterproof Depth | Up to 2 Meters |
| Weight | 38g |
Cleaning and Maintenance
- Do not submerge earphones in seawater or saltwater, as magnetic charging components are susceptible to corrosion.
- If not used frequently, charge the device at least once a month.
- Unauthorized disassembly of any parts is prohibited. If a defect is detected, discontinue use immediately and contact professional service centers.
- After exercising, promptly wipe off any moisture from the earphones, particularly the charging magnets, to prevent corrosion from sweat and saltwater.
- Keep the product away from fire, heat, freezing temperatures, and harsh chemicals. Avoid harsh impacts, disassembly, or excessive pressure on the device.
- Use a charging head with a 5V1A output or lower for safe charging.
Warranty
Products purchased directly from the Porodo website or shop come with a 24-month warranty. Products purchased from approved sellers have a 12-month warranty. To extend your warranty, visit https://porodo.net/warranty, fill out the form, and upload a picture of the product. A confirmation email will be sent upon acceptance.
For more information, please check: https://www.porodo.net/warranty
Contact Us
For any questions, please contact us at:
- Email: info@porodo.net
- Website: porodo.net
- Service Support: support@porodo.net
- Instagram: porodo
Porodo | Choose the Best!
Porodo Warranty
