Product Overview
The Porodo Soundtec Air Beat is a pair of open-design wireless earbuds offering a comfortable fit and clear audio. They come with a charging case for extended battery life and convenient storage.
Image Description: A pair of black wireless earbuds with ear hooks are shown inside an open black charging case. The earbuds feature the 'sondtec' logo.
Safety Precautions
- Do not attempt to disassemble or replace any part of the device unless specific instructions are provided in this manual.
- Keep the device away from liquids or moisture; it is not a waterproof product.
- If liquid enters the device, disconnect it from the Bluetooth device and move it to a safe place.
- Avoid assembling or disassembling the device with wet hands, as this may cause electric shock.
- Do not expose the device to high temperatures or dispose of it in fire, as it may explode.
- Avoid placing the device in environments with strong electromagnetic interference, as this may cause malfunction.
Package Contents
- Charging Case: [charging case] - Provides power and storage for the earbuds.
- Earbuds: [earbuds] - Wireless audio devices.
- USB Type-C Cable: [USB Type-C cable] - For charging the case.
Diagram
Earbuds Diagram: Features include a multi-function touch button and an LED indicator.
Charging Case Diagram: Features a Type-C charging port.
Specifications
| Feature | Details |
|---|---|
| Model No. | PDSTWMO.0 |
| Chipset | AB07LC3 |
| Rated Input | 5V / 1A |
| Battery Capacity (Case) | 300 mAh |
| Battery Capacity (Earbuds) | 40 mAh |
| Charging Interface | Type-C |
| Bluetooth Version | V5.4 |
| Bluetooth Name | PD_STWS_.0 |
| Playback Time | Up to 5 hours |
| Recharging Time (Case) | 1.5 hours |
| Max RF Output Power | 6 dB |
| Wireless Transmission Range | 10 MHz |
| Frequency Response | 20 Hz - 20 kHz |
Charging Case Description
The charging case has a capacity of 300 mAh and takes approximately 2 hours to fully charge. The rated input voltage for the case is 5V = 300mA, though actual performance may vary. To charge the case, connect a Type-C cable to a 5V power adapter, then connect the other end to the case's charging port. When the white indicator light in the charging compartment flashes, the case needs to be charged immediately for optimal performance.
Indicator Status
Earbud Indicator
- Power On: White LED lights up for 1 second.
- Power Off: Red LED lights up for 1 second.
- Pairing: White and red LEDs alternate blinking during pairing.
- Pairing Successful: The indicator turns off once the earbuds are paired.
- Charging: Red LED stays lit continuously while charging.
Charging Case Indicator
Charging (Not Fully Charged): The digital screen flashes to display the current power level during charging.
Fully Charged: When charging is complete, the digital screen shows "...".
Discharging: The current power level is displayed digitally. A slider shows the power status for both the right and left earbuds.
Low Battery: The battery display flashes on one side to indicate a low battery level.
User Instructions
Power On
Method 1: Remove the earbuds from the charging case; they will power on automatically.
Method 2: Press and hold the MF button on the earbuds for 3 seconds to power them on.
Power Off
Method 1: Place the earbuds back into the charging case and close the lid to power them off.
Method 2: If the left and right earbuds are powered on, they will automatically power off after 5 minutes of storage or disconnection.
Bluetooth Pairing
Step 1: Remove the earbuds from the charging case. The left and right earbuds will pair automatically.
Step 2: Open the Bluetooth settings on your device, and search for "PD_STWS_05". Select the product you wish to connect. (Supports single earbud use).
Image Description: A diagram shows two earbuds, an arrow indicating connection, and a mobile device screen displaying Bluetooth settings with 'My device' and 'PD_STWS_05' listed, with Bluetooth toggled on.
Touch Button Operation
Music Playback
- Previous Song: Triple tap the touch button on the left earbud to go to the previous song.
- Next Song: Triple tap the touch button on the right earbud to go to the next song.
- Volume Up: Single tap the touch button on the right earbud to increase volume.
- Volume Down: Single tap the touch button on the left earbud to decrease volume.
- Pause/Play: Double tap any earbud's touch button to pause or play music.
Hands-Free Calls
- Answer Call: Double tap any earbud's touch button to answer an incoming call.
- Reject Call: Long press any earbud's touch button for 2 seconds to reject an incoming call.
- End Call: Double tap any earbud's touch button to end the current call.
Voice Assistant
Activate Voice Assistant: Long press the touch button on either the left or right earbud for 2 seconds to activate the voice assistant.
Music/Gaming Mode
Switching Modes: Long press the touch button on the right (R) earbud for 2 seconds to switch between Music and Gaming modes.
Factory Reset
If the earbuds are not paired with a phone, press the earbud function button 5 times to clear pairing information and power off the device.
Harmful Materials
This product has been assessed according to the Chinese standard GB/T 26572.
| Part Name | Harmful Materials | |||||
|---|---|---|---|---|---|---|
| Pb | Hg | Cd | Cr(VI) | PBB | PBDE | |
| Printed Circuit Board | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ |
| Small Parts and Housing | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ |
Symbol Key:
- ◯: Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the maximum limit requirements specified in GB/T 26572.
- X: Indicates that the content of the hazardous substance in at least one of the homogeneous materials of the part exceeds the maximum limit requirements specified in GB/T 26572.
Parts marked with "X" are considered harmful due to global technological development limitations. Replacement of these materials is encouraged.
FCC Statement
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Product Disposal
This product should not be disposed of as unsorted household waste. It is important to separate this waste for proper treatment and recycling, in accordance with local waste management regulations.
Warranty
Products purchased directly from our website or Porodo store come with a 24-month warranty. For products purchased from our authorized resellers, the warranty is 12 months. To extend your warranty, please visit porodo.net/warranty and fill out the form with your product information. You may also need to upload a photo of your product. After your request is verified and accepted, an email will be sent to confirm your product warranty extension.
For more information, please check: porodo.net/warranty
Contact Us
If you have any questions regarding this privacy policy, please contact us at: info@porodo.net
Website: porodo.net
Customer Service: support@porodo.net
Instagram: porodo.me
