Porodo Soundtec GRAVIS True Wireless Earbuds

Package Contents

The package includes:

• Charging Case
• Earbuds (Left and Right)
• Type-C Cable

Schematic Diagram

The earbuds feature:

• Indicator Light (on earbud)
• Multi-function Touch Button
• Charging Port
• Microphone
• Sound Outlet

The charging case features:

• Indicator Light (on case)

Alerts and Warnings

• Do not attempt to disassemble or replace any part of the earbuds.
• The earbuds are not waterproof. Avoid submerging them in water or other liquids.
• If liquid accidentally enters the product, disconnect it immediately and remove the connection.
• Ensure your hands are dry when installing or removing the product to avoid electric shock.
• Keep the product away from heat sources or direct fire.
• Do not place the product in environments with strong electromagnetic forces, as this may cause malfunction.

Specifications

Charging Guide

Connect the charging base to a 5V power adapter using the Type-C charging cable.

Note: If the voltage drops below 3.4V, a low voltage warning will sound every 60 seconds with an audio prompt: "Low battery".

Indicator Light Guide

Instructions for Use

1. Power On: Remove the earbuds from the charging case to power them on, or press and hold the touch button for 5 seconds for manual power-on.
2. Power Off: Place the earbuds back into the charging case to power them off, or press and hold the touch button for 5 seconds for manual power-off.
3. Pairing and Connection:
   1. Open the charging case and take out the earbuds. The left and right earbuds will power on automatically.
   2. If the earbuds are powered off manually, they will enter pairing mode once Bluetooth is turned off on your mobile phone.
   3. When pairing, select "PD_STWS_IF" from the Bluetooth list on your phone. Upon successful pairing, the earbuds will announce "TWS Connected" or "TWS Connected Successfully".
4. Language Switch Tone: If the earbuds are in pairing mode but not connected to a mobile phone, press the touch button on either earbud four times to switch between English and Chinese voice prompts.
5. Automatic Power Off: If the earbuds remain in pairing mode without connecting to any device, they will automatically power off after 3 minutes.
6. Automatic Reconnection:
   1. Once the left and right earbuds are powered on, they will reconnect automatically.
   2. After successfully pairing the earbuds with your mobile phone, they will automatically reconnect to the phone when powered on, as long as Bluetooth is enabled on the phone.

Touch Function Guide

Voice Assistant

Activate Siri: Press and hold the touch button on either earbud for 3 seconds.

Music Playback

• Play/Pause: Tap the touch button on either earbud.
• Previous Song: Triple-tap the touch button on either earbud.
• Next Song: Double-tap the touch button on either earbud.

Call Management

• Answer Incoming Call: Press the touch button on either earbud.
• End Call: Press the touch button on either earbud.
• Reject Call: Press and hold the touch button on either earbud.

Material Content Table

0: Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit required by GB/T 26572.

X: Indicates that the hazardous substance content in at least one homogeneous material of the part exceeds the limit requirements specified in GB/T 26572.

Parts marked with "X" in the model are considered hazardous due to global technological limitations. These materials can be replaced as technology advances.

Printed Circuit Board Components: Includes printed circuit boards and their parts, electronic components, etc. Based on the product model, the earbuds you purchased may not contain all the components mentioned above.

Products sold in the People's Republic of China must display this logo. The number in the logo represents the product's period of use according to environmental protection standards under normal conditions.

Disposal

This product should not be disposed of as unsorted household waste. It is important to separate this waste for proper treatment and recycling, in accordance with local waste management regulations.

Warranty

Products purchased directly from the Porodo website or store come with a 24-month warranty.

When purchasing Porodo products from any of our authorized resellers, you receive a 12-month warranty only. If you wish to extend this warranty, please visit our website at porodo.net/warranty and fill out the form with your information. Do not forget to upload a picture of the product. After your request has been verified and accepted, we will send you an email confirming the warranty extension for your product.

For more information, please check: porodo.net/warranty