Technical Datasheet
Imēx
RAVINE BATH FILLER IN MATT BLACK
SKU: RVBFMB
Range
Ravine
Colour
Matt Black
TECHNICAL DRAWING
Dimensions are in millimetres except thread sizes which are BSP imperial.
[Diagram: Two views of a bath filler. Top view shows two circular inlets with dimensions 2-G3/4", 2-Ø36, and a central spout. Side view shows the spout with dimensions 129mm and a lever handle. Overall dimensions indicated include 145mm height, 180mm width between inlets, and 231.5mm center-to-center distance for inlets. Another smaller diagram shows the layout of the inlets with Ø32 and Ø10 dimensions.]
NOTES
- Our guarantee is subject to the product having been installed, used and maintained in accordance with our instructions.
- All working parts (such as hinges, ceramic disks, cartridges, seals and cistern fittings), which are subject to normal wear and tear, are covered for 36 months from proof of purchase date. This excludes seats, which are covered for 12 months.
- Our guarantee applies to the original purchaser and is nontransferable. Our guarantee is only applicable in the UK and ROI.
- This does not affect your statutory rights.
- Information is provided for guidance only and is non-binding. All measurements are approximate and subject to standard tolerances. IMEX Ceramic UK Ltd reserves the right to change product specifications without prior notification.
