Technical Datasheet
BATH FILLER WASTE AND OVERFLOW - MATT BLACK
SKU: BF125EXTDMB
TECHNICAL DRAWING
A technical drawing shows a linear diagram of the bath filler waste and overflow. Key dimensions are indicated: 27.5 mm, 25 mm, 70 mm (diameter), G1 1/4, and 650 mm. The drawing also indicates a 30 mm measurement and a diameter of 70 mm at the overflow end.
Specifications
| Weight | 0.0064 m3 |
| Guarantee | 10 years brassware, 3 years working parts |
Dimensions are in millimetres except thread sizes which are BSP imperial.
NOTES
- Our guarantee is subject to the product having been installed, used and maintained in accordance with our instructions.
- All working parts (such as hinges, ceramic disks, cartridges, seals and cistern fittings), which are subject to normal wear and tear, are covered for 36 months from proof of purchase date. This excludes seats, which are covered for 12 months.
- Our guarantee applies to the original purchaser and is nontransferable. Our guarantee is only applicable in the UK and ROI.
- This does not affect your statutory rights.
- Information is provided for guidance only and is non-binding. All measurements are approximate and subject to standard tolerances. We reserve the right to change product specifications without prior notification.
We turn bathrooms into personal living spaces
T:01530 835598 E: sales@imex.team imex.website
IMEX Ceramic UK Ltd
15 Sybron Way, Millbrook Industrial Estate, Crowborough, East Sussex, TN6 3DZ
VAT Ref No: 101013309
