Technical Datasheet
SINGLE LEVER BASIN MIXER
SKU: XCBAS
TECHNICAL DRAWING
Front View: Shows a basin mixer with a single lever. The diameter of the base is indicated as Ø50. The height of the mixer is 128mm. The lever mechanism has a maximum thickness of 35mm.
Side View: Illustrates the mixer from the side, showing the lever mechanism and the spout. The height to the spout is 96mm, and the height to the lever pivot is 56mm. The mounting bolt has a diameter of Ø35. The water inlet connection is 2-G1/2".
Top View: Depicts the top of the mixer, showing the lever and the spout. The total length of the mixer from the back to the spout tip is 132.5mm.
Specifications
- Weight: 0.0039 m³
- Range: Arco
NOTES
Dimensions are in millimetres except thread sizes which are BSP imperial.
Our guarantee is subject to the product having been installed, used and maintained in accordance with our instructions. All working parts (such as hinges, ceramic disks, cartridges, seals and cistern fittings), which are subject to normal wear and tear, are covered for 36 months from proof of purchase date. This excludes seats, which are covered for 12 months. Our guarantee applies to the original purchaser and is non-transferable. Our guarantee is only applicable in the UK and ROI. This does not affect your statutory rights.
Information is provided for guidance only and is non-binding. All measurements are approximate and subject to standard tolerances. Imex reserves the right to change product specifications without prior notification.
