Technical Datasheet
IVO BATH FILLER
SKU: IVBF
TECHNICAL DRAWING
Diagram Description: The diagram shows a bath filler with two inlets and a spout. It includes dimensions for width (180mm and 233mm), height (132mm and 145mm), depth (76mm), and inlet connection size (G3/4"). There is also a detail showing a maximum depth of 35mm for the inlet connection.
| Weight | 0.0086 m³ |
| Range | Ivo |
Dimensions are in millimetres except thread sizes which are BSP imperial.
NOTES
Our guarantee is subject to the product having been installed, used and maintained in accordance with our instructions.
All working parts (such as hinges, ceramic disks, cartridges, seals and cistern fittings), which are subject to normal wear and tear, are covered for 36 months from proof of purchase date. This excludes seats, which are covered for 12 months.
Our guarantee applies to the original purchaser and is nontransferable. Our guarantee is only applicable in the UK and ROI.
This does not affect your statutory rights.
Information is provided for guidance only and is non-binding. All measurements are approximate and subject to standard tolerances. We reserve the right to change product specifications without prior notification.
