Technical Datasheet
SKU: FLBFMB
FLITE BATH FILLER IN MATT BLACK
TECHNICAL DRAWING
A technical drawing illustrates the Imex Flite Bath Filler. The drawing shows a front view and a side view of the bath filler, with dimensions indicated. The front view shows a double-spouted filler with two handles. Dimensions provided include: 130 mm height, 180 mm width, and 2-G3/4" thread size for the connections. A top view of the handles is also shown with a dimension of 236 mm. The side view shows the spout and handle with dimensions of 110 mm height and 57 mm projection. A maximum angle of 35 degrees is indicated for the handles. The overall height of the filler is shown as 155.5 mm.
Weight: 0.0139 m3
Range: Flite
Colour: Matt Black
Dimensions are in millimeters except thread sizes which are BSP imperial.
NOTES
Our guarantee is subject to the product having been installed, used and maintained in accordance with our instructions.
All working parts (such as hinges, ceramic disks, cartridges, seals and cistern fittings), which are subject to normal wear and tear, are covered for 36 months from proof of purchase date. This excludes seats, which are covered for 12 months.
Our guarantee applies to the original purchaser and is non-transferable. Our guarantee is only applicable in the UK and ROI.
This does not affect your statutory rights.
Information is provided for guidance only and is non-binding. All measurements are approximate and subject to standard tolerances. Imex reserves the right to change product specifications without prior notification.
