Technical Datasheet
SKU: RVBFCP
RAVINE BATH FILLER IN CHROME
TECHNICAL DRAWING
Dimensions are in millimeters except thread sizes which are BSP imperial.
_______
| |
|_______|
/ \
/_________
| | | |
| |_____| |
|__| |__|
/ \ / \
/______\ /______\
|________|________|
| | | |
|_| |_|
2-G3/4"
_______
| |
|_______|
/ \
/_________
| | | |
| |_____| |
|__| |__|
/ \ / \
/______\ /______\
|________|________|
| | | |
|_| |_|
2-G3/4"
Diagram showing the dimensions of the Ravine Bath Filler in Chrome. Key dimensions include:
- Height: 145mm
- Width (center to center of inlets): 180mm
- Depth of spout: 129mm
- Diameter of inlets: 2-G3/4"
- Diameter of holes for mounting: Ø32mm
- Maximum wall thickness for mounting: Max 35mm
- Overall width: 231.5mm
- Height to spout: 51mm
| Range | Ravine |
| Colour | Chrome |
NOTES
- Our guarantee is subject to the product having been installed, used and maintained in accordance with our instructions.
- All working parts (such as hinges, ceramic disks, cartridges, seals and cistern fittings), which are subject to normal wear and tear, are covered for 36 months from proof of purchase date. This excludes seats, which are covered for 12 months.
- Our guarantee applies to the original purchaser and is non-transferable. Our guarantee is only applicable in the UK and ROI.
- This does not affect your statutory rights.
- Information is provided for guidance only and is non-binding. All measurements are approximate and subject to standard tolerances. Imex reserves the right to change product specifications without prior notification.