Baby Trend XCEL Jogger Travel System - Instruction Manual
Warranty Information
DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND FOR REPLACEMENT PARTS, SERVICE AND REPAIR.
The Baby Trend® warranty covers workmanship defects within the first 180 days of purchase. The warranty is void if the product has been subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration, accident, or if the serial number has been altered or removed. Any damage to property during installation is the sole responsibility of the end user.
Customer Service can be contacted at 1 (800) 328-7363, Monday through Friday, between 8:00 am and 4:30 pm PST. Return Authorizations are required prior to returning products. Warranty is valid only in North America.
Parts Included
Before assembling the stroller, check that you have all the parts for this model:
- Stroller
- Parent Tray
- Front Wheel
- Fender Screws
- Axel Nuts
- Retainer plate
- Fender
- Child Tray
- Rear Wheels
- Infant Car Seat (requires separate manual for base type and instructions)
- Base
Diagram showing all stroller components.
Important Safety Warnings
Please follow all instructions to ensure your child's safety. Keep these instructions for future reference.
Failure to follow these instructions could result in serious injury or death. Always use the safety harness and ensure children are properly positioned.
Never leave children unattended.
The wheel can detach and cause tip over. Pull on the wheel to assure it is securely attached.
This single jogger is designed for one child only. Use with more than one child may cause imbalance and injury.
Purses, shopping bags, parcels, diaper bags, or accessory items may change the stroller's balance and cause hazardous unstable conditions.
Weight Limits:
- Basket: 5 lbs (2.26 kg)
- Child tray and Parent tray: 3 lbs (1.36 kg) each
- Side pockets (2): 3 lbs (1.36 kg)
- Back pockets (2): 3 lbs (1.36 kg)
- Canopy pockets (2): 1 lb (0.45 kg)
Excessive weight may cause a hazardous unstable condition.
Ensure the stroller is fully erect and latched in the open position before allowing children near it.
Using the stroller with children weighing more than 50 lbs (22.67 kg) or over 42 inches (106.7 cm) tall may cause excessive wear and stress, leading to instability.
NEVER use the stroller on stairways or escalators.
NEVER use the stroller with roller skates, in-line skates, skateboards, or bicycles.
It is recommended that the child occupant be at least 6 months of age for jogging. Consult your healthcare provider regarding the use of a jogging stroller for your child.
NEVER allow your stroller to be used as a toy.
Cleaning: Use only mild household soap or detergent and warm water on a sponge or clean cloth.
Regularly check your stroller for loose screws, worn parts, torn material, or stitching. Replace or repair parts as needed.
Discontinue use if the stroller malfunctions or is damaged. Contact customer service for repair or replacement parts.
Assembly Instructions
IMPORTANT! Follow these instructions carefully for safe operation. Keep for future reference.
IMPORTANT! Before assembly and each use, inspect for damaged hardware, loose joints, missing parts, or sharp edges. NEVER use if parts are missing or broken.
IMPORTANT! Adult assembly is required.
Front Wheel Installation
WARNING: This wheel uses a double nut locking system. Follow all instructions carefully for child safety.
- Release the fold latch. Unfold the stroller frame by pulling upward on the handle. Ensure the frame is locked by pressing down on the handle.
- Lean the stroller backward so it rests on the handle and rear axle frame, with the front wheel forks pointing upward. Diagram showing stroller tilted back with front wheel forks up.
- Slide the front wheel onto the front forks. Diagram showing front wheel being attached to forks.
- Slide the retainer plate onto the front wheel. Ensure the raised lip points toward the fork and insert into the fork slot. Align the retainer plate tab with the fork slot before tightening. Diagram illustrating retainer plate and fork alignment.
- Install the axel nuts and tighten with a wrench until significant resistance is felt and the wheel is held tightly. Diagram showing axel nut being tightened.
Rear Wheel Installation
- Lean the stroller forward to rest on the front wheel.
- Align the rear wheel's axle into the bushing on the stroller frame. Push the wheel into the bushing until it clicks. Repeat for the other wheel. Check that each wheel is set by pulling on it. Diagram showing rear wheel attachment.
- NEVER use the stroller if wheels are not locked. Contact customer service at 1-800-328-7
Related Documents
Baby Trend Expedition Jogger Travel System Instruction Manual
Comprehensive instruction manual for the Baby Trend Expedition Jogger Travel System (Model TJ94XXXD). Provides detailed guidance on assembly, parts identification, safety warnings, proper usage, infant car seat compatibility, maintenance, and warranty information.Baby Trend TJ99 Xcel RG Travel System Instruction Manual
This manual provides comprehensive instructions for the Baby Trend TJ99 Xcel RG Travel System, covering warranty, parts identification, assembly, safety guidelines, and maintenance. It includes warnings and cautions in English, Spanish, and French to ensure safe operation and proper use.Baby Trend Journey Jogger Travel System Instruction Manual
Comprehensive instruction manual for the Baby Trend Journey Jogger Travel System (Model TJ02XXXA), covering warranty, parts identification, safety warnings, assembly steps, folding/unfolding, maintenance, and infant car seat compatibility.Baby Trend Go Gear Propel 35 Jogger Travel System Instruction Manual
This manual provides essential instructions for assembling, using, and maintaining the Baby Trend Go Gear Propel 35 Jogger Travel System. It includes detailed safety warnings, assembly steps, operational guidance, and care recommendations to ensure safe and proper use of the stroller.Baby Trend RACE TEC Jogger Travel System Instruction Manual
Comprehensive instruction manual for the Baby Trend RACE TEC Jogger Travel System, covering safety warnings, assembly steps, parts identification, features, maintenance, and infant car seat compatibility.Baby Trend Expedition Premiere Jogger Travel System Instruction Manual
Comprehensive instruction manual for the Baby Trend Expedition Premiere Jogger Travel System, covering assembly, safety, maintenance, and usage.Baby Trend TJ75XXXC Jogger Stroller Instruction Manual
Comprehensive instruction manual for the Baby Trend TJ75XXXC jogger stroller, covering assembly, safety, usage guidelines, maintenance, and warranty information. Learn how to safely use and care for your Baby Trend stroller.Baby Trend Turnstyle SNAP TECH™ Jogger Travel System Instruction Manual
Comprehensive instruction manual for the Baby Trend Turnstyle SNAP TECH™ Jogger Travel System, covering assembly, safety guidelines, parts identification, maintenance, and usage instructions.