ACCESSORY TO PRODUCT- WIRING DIAGRAMS
This document outlines the wiring diagrams for various Vortice fan accessories, including EEC Single Phase, EEC Three Phase, PMR, and POT configurations.
EEC SINGLE PHASE – DIRECT- (WITHOUT REGULATION)
Instructions:
- 1- 220V motor supply through L & N
- 2- Jumper between terminals 2 & 3 on the control terminals (Vsp and Vcc)
Motor Connections (Example 1):
| No. | Signal | Colour | Specification |
| 1 | GND | Blue | [Ground Symbol] |
| 2 | Vsp | Yellow | 0-10V/PWM |
| 3 | Vcc | Red | DC 10V |
| 4 | FG | White | 1 Pulse/R |
Motor Connections (Example 2):
| No. | Signal | Colour | Specification |
| 1 | GND | Blue | [Ground Symbol] |
| 2 | Vsp | Yellow | 0-10V/PWM |
| 3 | Vcc | Red | DC 10V |
| 4 | FG | White | 12 Pulse/R |
Power Supply Connections:
| No. | Signal | Colour | Specification |
| 1 | L | Brown | AC 220V-50/60 Hz |
| 2 | N | Blue | AC 220V-50/60 Hz |
| 3 | Pe | Yellow-Green | [Ground Symbol] |
EEC THREE PHASE – DIRECT- (WITHOUT REGULATION)
Instructions:
- 1- 380V motor supply through L1, L2, and L3
- 2- Jumper between terminals 2 and 3 of the control (Vsp and Vcc)
Motor Connections (Example 1):
| No. | Signal | Colour | Specification |
| 1 | GND | Blue | [Ground Symbol] |
| 2 | Vsp | Yellow | 0-10V/PWM |
| 3 | Vcc | Red | DC 10V |
| 4 | FG | White | 1 Pulse/R |
Motor Connections (Example 2):
| No. | Signal | Colour | Specification |
| 1 | GND | Blue | [Ground Symbol] |
| 2 | Vsp | Yellow | 0-10V/PWM |
| 3 | Vcc | Red | DC 10V |
| 4 | FG | White | 12 Pulse/R |
Power Supply Connections:
| No. | Signal | Colour | Specification |
| 1 | L1 | Black | AC380V/50Hz |
| 2 | L2 | Black | AC380V/50Hz |
| 3 | L3 | Black | AC380V/50Hz |
| 4 | Pe | Yellow-Green | [Ground Symbol] |
PMR + EEC MOTOR (Single Phase)
Instructions:
- 1- 220V Supply motor in N and L through the switch
- 2- Power the REGC with 10V. Connect GND with GND and Vcc (10V) with Vcc
- 3- Connect terminal 2 (Vsp) of the motor with Output (0-10V) of the PMR (control signal 0-10V)
VENTILADOR EEC (Single Phase Motor) Connections:
| No. | Signal | Colour | Specification |
| 1 | L | Brown | AC 220V-50/60 Hz |
| 2 | N | Blue | AC 220V-50/60 Hz |
| 3 | Pe | Yellow-Green | [Ground Symbol] |
Potentiometer (PMR) Connections:
| Colour | Signal | Specification |
| Blue | GND | GND→0V |
| Black | Output | Output→0-10V |
| Red | Vcc | Vcc→10V |
VENTILADOR EEC Motor Terminals:
| No. | Signal | Colour | Specification |
| 1 | GND | Blue | [Ground Symbol] |
| 2 | Vsp | Yellow | 0-10V/PWM |
| 3 | Vcc | Red | DC 10V |
| 4 | FG | White | 1 Pulse/R |
PMR + EEC MOTOR (Three Phase)
Instructions:
- 1- 380V Supply motor in L1, L2, and L through the switch
- 2- Power the REGC with 10V. Connect GND with GND and Vcc (10V) with Vcc
- 3- Connect terminal 2 (Vsp) of the motor with Output (0-10V) of the PMR (control signal 0-10V)
VENTILADOR EEC (Three Phase Motor) Connections:
| No. | Signal | Colour | Specification |
| 1 | L1 | Black | AC380V/50Hz |
| 2 | L2 | Black | AC380V/50Hz |
| 3 | L3 | Black | AC380V/50Hz |
| 4 | Pe | Yellow-Green | [Ground Symbol] |
Potentiometer (PMR) Connections:
| Colour | Signal | Specification |
| Blue | GND | GND→0V |
| Black | Output | Output→0-10V |
| Red | Vcc | Vcc→10V |
VENTILADOR EEC Motor Terminals:
| No. | Signal | Colour | Specification |
| 1 | GND | Blue | [Ground Symbol] |
| 2 | Vsp | Yellow | 0-10V/PWM |
| 3 | Vcc | Red | DC 10V |
| 4 | FG | White | 1 Pulse/R |
POT + EEC FAN (Single Phase)
Instructions:
- 1- 220V Supply motor through N and L
- 2- Power the POT with 10V. Connect GND with GND and Us with Vcc
- 3- Connect terminal 2 (Vsp) of the motor with +OUT of the POT (control signal 0-10V)
POT Device Description:
The POT device has terminals for Us, +OUT, and GND. Maximum ratings: 4 A/250 Vac, 12 Vdc/1 mA, 10 A/12 Vdc. The control signal is 0-Us.
VENTILADOR ES (Single Phase Motor) Connections:
| No. | Signal | Colour | Specification |
| 1 | GND | Blue | [Ground Symbol] |
| 2 | Vsp | Yellow | 0-10V/PWM |
| 3 | Vcc | Red | DC 10V |
| 4 | FG | White | 1 Pulse/R |
Power Supply Connections:
| No. | Signal | Colour | Specification |
| 1 | L | Brown | AC 220V-50/60 Hz |
| 2 | N | Blue | AC 220V-50/60 Hz |
| 3 | Pe | Yellow-Green | [Ground Symbol] |
POT + EEC FAN (Three Phase)
Instructions:
- 1- 380V Supply motor through L1, L2, and L3
- 2- Power the POT with 10V. Connect GND with GND and Us with Vcc
- 3- Connect terminal 2 (Vsp) of the motor with +OUT of the POT (control signal 0-10V)
POT Device Description:
The POT device has terminals for Us, +OUT, and GND. Maximum ratings: 4 A/250 Vac, 12 Vdc/1 mA, 10 A/12 Vdc. The control signal is 0-Us.
VENTILADOR ES (Three Phase Motor) Connections:
| No. | Signal | Colour | Specification |
| 1 | L1 | Black | AC380V/50Hz |
| 2 | L2 | Black | AC380V/50Hz |
| 3 | L3 | Black | AC380V/50Hz |
| 4 | Pe | Yellow-Green | [Ground Symbol] |
POT Terminal Connections:
| No. | Signal | Colour | Specification |
| 1 | GND | Blue | [Ground Symbol] |
| 2 | Vsp | Yellow | 0-10V/PWM |
| 3 | Vcc | Red | DC 10V |
| 4 | FG | White | 1 Pulse/R |
